Displaying Configuration Information - HP Integrity Superdome 2 16-socket Getting Started Manual

Configuring the Cisco Nexus B22 Fabric Extender for HP
The next time that you reboot the Fabric Extender, the configured fabric interfaces are pinned to the host
interfaces in an ascending order by port number of the fabric interface. If you want to configure the same
fixed distribution of host interfaces without restarting the Fabric Extender, enter the fex pinning
redistribute command.
To redistribute the host interfaces on the Fabric Extender, perform this task:
Command
switch# fex pinning redistribute chassis
This example shows how to redistribute the host interfaces on a Fabric Extender:
switch# fex pinning redistribute 100 
Caution The fex pinning redistribute command disrupts all the host interface ports of the Fabric Extender.
For additional information about configuring the Cisco Nexus B22 Fabric Extender for HP and Cisco
Nexus 5000 Series Switches, see the following documentation:
•
•
Displaying Fabric Extender Information
This section describes the show commands that are available to display the configuration and status of
the Fabric Extender and includes the following topics:
•
•

Displaying Configuration Information

To display configuration information about the defined interfaces, perform one of these tasks:
Command
switch# show fex [chassis [detail]
switch# show interface type number
fex-intf
switch# show interface fex-fabric
Cisco Nexus B22 Fabric Extender for HP Getting Started Guide
12
Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide
http://www.cisco.com/en/US/docs/switches/datacenter/nexus2000/sw/configuration/guide/rel_4_0
_1a/NX2000CLIConfig.html
Cisco Nexus 5000 Series NX-OS Software Configuration Guide
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_
4_0_1a/CLIConfigurationGuide.html
Displaying Configuration Information, page 12
Displaying Chassis Management Information, page 15
Purpose
Redistributes the host connections. The range of the
chassis ID is from 100 to 199.
Purpose
Displays information about a specific Fabric Extender
or all attached units.
Displays the Fabric Extender ports pinned to a
specific switch interface.
Displays the switch interfaces that have detected a
Fabric Extender uplink.