Siemens 
D12-52 Operating And Installation Instruction page 38

Pausing the
programme
38
q Open the washer dryer door.
q Remove the laundry.
i If a programme was interrupted at a high
temperature, such as drying programme, do not
open the washer dryer until the appliance has
cooled down.
If you would like to pause a runing programme without
changing the sequence:
q Touch the Start/Pause button during washing
cycle, the display shows
door open symbol
means the door can be opened after 1 minute
later, when the
open the door if required, add/remove the laundry,
close the door.
q To continue the programme. Touch the
Start/Pause button again.
i The pause function cannot be activated during
drying cycle and water pressure detecting period.
If a programme was paused at a high water level or
temperature, the door open symbol does not
appear.
and PAUS"(pause), if
flashes at this moment
n
symbol and OPE " come on,