Related Manuals for Kenwood KVT-847DVD
Summary of Contents for Kenwood KVT-847DVD
- Page 1 MONITOR WITH DVD RECEIVER KVT-837DVD KVT-847DVD KVT-867DVD INSTRUCTION MANUAL © B64-3181-00/00 (MV/XV/VV)
-
Page 2: Table Of Contents
Contents Before Use ............ 4 TV/ VIDEO Control ........38 Displaying the TV Picture screen Notes on playing MP3/WMA/JPEG/MPEG .. 6 Displaying the Easy Control Panel Displaying the TV Control screen Opening/Closing the Monitor and Displaying the TV Menu screen Power Switch .......... - Page 3 DVD Setup ..............54 Sound Effects Menu ........74 Displaying the DVD SETUP 1 screen Sound Effects Menu ..........74 Displaying the DVD SETUP 2 screen Displaying the Control screen Displaying the DVD SETUP 3 screen Displaying the Sound Effects Menu screen Language Setup Audio Control ............75 Parental Level Setup...
-
Page 4: Before Use
Called lens fogging, discs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. English... - Page 5 Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. Icons on the DVD discs Icon Description Indicates the region code where the disc can be played. Number of voice languages recorded with the audio function.
-
Page 6: Notes On Playing Mp3/Wma/Jpeg/Mpeg
Notes on playing MP3/WMA/JPEG/MPEG This unit can play MP3 (MPEG1 Audio Layer 3)/ WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however, • Play mode may not be possible when portions of the functions that the MP3/WMA/JPEG/MPEG recording media of Windows Media Player 9 or higher are used. and formats acceptable are limited. - Page 7 MP3/WMA/JPEG/MPEG playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD/DVD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
-
Page 8: Opening/Closing The Monitor And Power Switch
Opening/Closing the Monitor and Power Switch Open the monitor [OPEN/CLOSE] key Close the monitor Turn the power on Hold down the [SRC] key more than one second to turn it off. [SRC] key Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, •... -
Page 9: Removing/Attaching The Protection Panel
Removing/Attaching the Protection Panel Remove the protection panel Attach the protection panel Two hooks Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Close the monitor first, then remove or attach the protection panel. -
Page 10: Kvt-837Dvd/847Dvd/867Dvd Basic Operations
KVT-837DVD/847DVD/867DVD Basic operations ■ When the monitor is open SCRN MODE M.CTRL V.SEL V.OFF AV OUT SEL OPEN/CLOSE DISP ■ When the monitor is closed OPEN/CLOSE DISP 1 Play Disc 4 Search Selectors [Disc insertion slot] [22]/[33] key A disc is played when you insert it. Searches a disc backward or forward. - Page 11 Band/Folder Selectors [FM]/[AM] key [FM] key switches to the FM1/2/3 band or next DVD/VCD folder/disc. [AM] key switches to the AM band or previous folder/ TV */ Video disc. R-CAM * p Attenuater [ATT] key Navigation * Attenuaters the volume. Press it again to cancel muting.
-
Page 12: Basic Operations Of Remote Controller
Basic Operations of Remote Controller ENTER ENTER CANCEL CANCEL MENU MENU RETURN RETURN – – BAND BAND ZOOM ZOOM ¢ ¢ ZOOM ZOOM POSITION POSITION MODE ROUTEM VIEW 1 . ? & 2 ABC 3 DEF MENU ZOOM TOP MENU AUDIO MAPDIR VOICE... - Page 13 6 [BAND] key w [2-ZONE] key (When 1 is set to "DVD" or "AUD") DISC DISC TUNER Select a disc and a folder. Turns Zone function on or off each time you press the (When 1 is set to "TV" or "AUD") key.
- Page 14 Basic Operations of Remote Controller o [0] – [9] key [ ]/[ ] key (When 1 is set to "TV") (When 1 is set to "DVD") (When 1 is set to "AUD") TUNER : Slow Backward. — : Recall the stations on memory. : Slow Forward.
-
Page 15: About Discs
About discs Handling discs Removing discs • Do not touch the recording surface of the disc. When removing discs from this unit pull them out horizontally. Discs that cannot be used • Discs that are not round cannot be used. •... -
Page 16: Switching Small Display
Switching Small Display The Small Display screen mode changes each time the [DISP] key is pressed. OPEN/CLOSE DISP [DISP] key "AUX EXT" Navigation "NAV" STANDBY "STANDBY" * Hold down the [DISP] key more than 1 second to switch to the Frequency display. English... -
Page 17: Switching Screen Mode
Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. OPEN/CLOSE DISP Full picture mode (FULL) Justify picture mode (JUST) Cinema picture mode (CINEMA) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed. -
Page 18: Controling During Dvd Video, Video Cd, Jpeg Or Mpeg Playback
Controling during DVD Video, Video CD, JPEG or MPEG Playback Various control screens appear when you play back a DVD Video (DVD), a Video CD (VCD) disc, a JPEG or MPEG files. Displaying the DVD/VCD/JPEG/MPEG Playback screen 1 Title Number Display You can use the following operations when 2 Chapter Number Display displaying DVD/VCD/JPEG/MPEG images. -
Page 19: Displaying The Easy Control Panel
JPEG/MPEG playback screen e Folder/File Number Display P 0:01:48 DVD MEDIA r Forword File Search Area Mode: FULL AVOUT: Selects the next folder or file. t Backword File Search Area Selects the previous folder or file. y Picture Control Button Area (page 23) JPEG playback only. -
Page 20: Displaying The Dvd/Vcd Control Screen
Title 1 Chap T 0:05:20 c Plays or pauses. 13:50 KENWOOD v Slow Forwards or Backwards. b Turns the PBC function of VCD On or Off. (VCD Ver 2.0) n Switches the Repeat Play operations in the following sequence. - Page 21 Controling during DVD Video, Video CD, JPEG or MPEG Playback English...
-
Page 22: Dvd Disc Menu
ZOOM Menu screen. When you touch a chapter and title, it is played back. Zoom Control Highlight [ Highlight On ] DVD Menu DVD Menu 1. KENWOOD 1. KENWOOD 2. KENWOOD 2. KENWOOD Zoom Cancel Exit 3. KENWOOD 3. KENWOOD 4. -
Page 23: Vcd Zoom Control
Controling during DVD Video, Video CD, JPEG or MPEG Playback VCD Zoom Control Information Display Displays an enlarged VCD screen. Displays the DVD and AV information. Information Display Display the Zoom Control screen Button Area (page 18,19) Zoom Control Button Area (page 18) The information is displayed for 5 seconds. -
Page 24: Cd/Mp3/Wma/Jpeg/Mpeg/Disc Changer Play Control
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control You can call various control screens during CD/MP3/WMA/JPEG/MPEG/Disc Changer playback. Displaying the Easy Control Panel 1 Adjusts the volume. The CD/MP3/WMA/JPEG/MPEG/Disc Changer Play 2 Switches the source. Control Panel is displayed in a floating position of the selected picture. -
Page 25: Changer Control Screen
Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Control screen During CD playback You can play the CD/MP3/WMA/JPEG/MPEG/Disc 9 Adjusts the volume. changer using various functions. p Calls the CD Menu. q Calls the Sound Effects Menu. (page 74) w Switches the source. Displays the Source Select screen. - Page 26 MP3/WMA/JPEG/MPEG Control screen During MP3/WMA/JPEG/MPEG play MENU / Ejects a disc. z Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) Direct DVD MEDIA DVD MEDIA x Stops to play. Folder Folder Next When pressed twice, the disc is played back from DISP SCRL its beginning in the next time.
-
Page 27: Set Disc Name
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Disc Changer Control screen During play by the disc changer MENU I Selects a track. Disc Starts Fast Forwards or Fast Backwards when it is held down. Direct CD-CH O Selects a disc. Disc Next : Plays or pauses. DISP SCRL TIME... -
Page 28: Changer Menu Screen
Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Menu screen Selects options from various function menus. You can select menu options using various Returns to the CD/MP3/WMA/JPEG/MPEG/Disc functions. Changer Control screen. MENU • The available functions vary depending on the source used. CD Menu screen MENU MENU Name Set... -
Page 29: Set Disc Name
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Set Disc Name Select Folder (during MP3/WMA/JPEG/ MPEG play) Names a CD. The folders of an MP3/WMA/JPEG/MPEG disc are Play a CD you wish to name listed for quick search. Call the CD/Disc Changer Menu Call the MP3/WMA/JPEG/MPEG Menu MENU MENU Select the Set Name mode... -
Page 30: Id3/Wma Tag Display (During Mp3/Wma Play)
The discs loaded on the disc changer are listed for listed. quick disc selection. Call the MP3/WMA/JPEG/MPEG Menu Call the Disc Changer Menu MENU MENU Display the ID3/WMA TAG Call the Disc Select Menu CH Disc Select Infomation 1.KENWOOD MENU MENU Title: KENWOOD 2.KENWOOD DISP Artist: KENWOOD 3.KENWOOD Album: 4.KENWOOD... -
Page 31: Direct Search
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player Select the Direct Search mode # BS DIRECT The following items can be searched directly each time it is pressed. -
Page 32: Tuner Control
Turns the CRSC function On or Off. (Only CRSC when receiving the FM broadcast. The CRSC indicator displayed when the CRSC function is Off.) <Function of KVT-847DVD/867DVD> y Selects the Auto Memory mode. (See page 34 for the <Auto Memory>) u Switches the Seek mode. -
Page 33: Displaying The Tuner Menu Screen
(Function of KVT-837DVD) Selects the Program Service Name, Station Name, or Radio Text mode for text display. (Function of KVT-847DVD/867DVD) o Scrolls the display text. (Function of KVT-837DVD) ; Turns the Local seek function On or Off. -
Page 34: Seek Mode
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. Select a station you wish to store in memory SEEK is not shown, touch SEEK Next The mode is switched in following order each time Store in memory you touch the button. -
Page 35: Preset Select
Tuner Control Preset Select Function of KVT-847DVD/867DVD Set Station Name Lists and tunes in stations in memory one after the Names a station. other. Tune in a station you wish to name Call the Tuner Menu MENU Call the Tuner Menu... -
Page 36: Direct Search
Function of KVT-837DVD Direct Search Traffic Information Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched Select a band to the traffic information and it is displayed automatically. – BAND When the traffic bulletin starts... The Traffic Information screen appears Select the Direct Search mode automatically. -
Page 37: Search For Program Type
Tuner Control Function of KVT-837DVD Function of KVT-837DVD Search for Program Type Radio Text A program is tuned when you set its program type. You can display the radio text. (Only when receiving the FM broadcast.) (Only when receiving the FM broadcast.) Call the Tuner Menu Call the Tuner Menu MENU... -
Page 38: Tv/ Video Control
TV/ VIDEO Control Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional accessory TV Tuner connected.) Displaying the TV Picture screen 1 TV Band Number Display Various control screens appear in the TV Source 2 TV Area Group Display (page 70) mode. -
Page 39: Displaying The Tv Control Screen
Displaying the TV Control screen t Adjusts the volume. You can tune in a TV station using various y Calls the TV Menu. functions. u Calls the Sound Effects Menu. (page 74) i Displays the Source Select screen. (page 45) o Calls the Setup Menu. -
Page 40: Displaying The Tv Menu Screen
Displaying the TV Menu screen z Selects options from various function menus. You can select menu options using various x Returns to the TV Control screen. functions. MENU TV Menu screen MENU MENU Preset Select Name Set English... -
Page 41: Seek Mode
Before Use TV/ VIDEO Control Seek Mode Auto Memory Sets a TV station selection. Stores stations with good reception in memory automatically. SEEK Select a band you wish to store in memory is not shown, touch SEEK Next The mode is switched in following order each time you touch the button. -
Page 42: Manual Memory
Before Use Manual Memory Preset Select Stores the current receiving channel in memory. Lists and tunes in stations in memory one after the other. Select a channel you wish to store in memory Call the TV Menu (Page 39 y) MENU Store in memory Call the Preset Select Menu... -
Page 43: Set Station Name
TV/ VIDEO Control Function of KVT-837DVD (NTSC TV type only) Set Station Name Direct Search Names a station. Tunes in a station when its channel number is Select a station you wish to name entered. Select the Direct Search mode # BS DIRECT Call the TV Menu... -
Page 44: Character Entry
Character Entry How To Use the Character Entry screen 1 Shifts the cursor. When you select the Set Disc Name mode or 2 Enters a space. others, the following screen appears for character If you erase a character, locate the cursor on it and entry. -
Page 45: Source Select
DVD VIDEO SCRL TIME Title 1 Chap T 0:05:20 13:50 KENWOOD Displaying the Source Select screen 1 Adjusts the volume. 2 Select the source. Direct 3 Returns to the Control screen previously displayed. 4 Calls the Sound Effects Menu. (page 74) 5 Calls the Setup Menu. -
Page 46: Adjusting The Monitor Display Position And Quality
Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen 1 Brightness Control You can adjust the picture quality using the Disabled if the Auto Dimmer is On. following keys. -
Page 47: Setup Menu
DVD VIDEO SCRL TIME Title 1 Chap T 0:05:20 13:50 KENWOOD Displaying the Setup Menu screen 1 Adjusts the volume. 2 Scrolls the Setup Menu. 3 Calls each Setup Menu. 4 Calls the Sound Effects Menu. (page 74) Setup Menu screen... -
Page 48: Audio Set Up
Audio Set Up (Other than STANDBY mode) You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up screen 1 Adjusts the volume. If your car type is selected, the Digital Time 2 Returns to the Control screen of the previous Alignment and Equalizer is set automatically (for source. -
Page 49: Displaying The Channel Level Screen
Before Use Setup Menu Displaying the Channel Level screen r Selects a speaker to be set. You can set the volume at each setup position. (see <Channel Level>, page 51) t Sets the speaker volume. (see <Channel Level>, page 51) y Starts or stops test signal tone output for setup Channel Level screen check. -
Page 50: Speaker Set Up
Speaker Set Up Select a speaker type You can select a speaker type and its size to get the best sound effects. Select a speaker you wish to adjust You can select any of the following speaker types. (Page 48 8) Center speaker: NONE, 40mm x 70mm, 5cm, 10cm, 13cm, Speaker Set Up screen... -
Page 51: Channel Level
Before Use Setup Menu Channel Level You can set the volume at each setup position. Select a speaker you wish to adjust (Page 49 r) Channel Level setup screen MENU Test Front Right +8 dB Channel Level Channel Level Channel Level 1 Center speaker 2 Left front speaker 3 Right front speaker... -
Page 52: Dta Setup
DTA Setup Set a delay time Manually sets the sound output timing of each channel. Display the DTA Setup screen The speakers are virtually moved to the desired distance. (Page 48 6) When the values of center speaker and front speakers increase, they are virtually moved forward. -
Page 53: Crossover Network Setup
Setup Menu Crossover Network Setup You can manually set a crossover frequency of speakers. (Page 48 p) X'Over X'Over Subwoofer 100Hz 1kHz Frequency Phase Normal 80 Hz Phase Normal Slope 12dB/Oct Return 1 Sets a crossover frequency. 2 Sets a crossover slope. 3 Returns to the Speaker Set Up screen. -
Page 54: Dvd Setup
DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. DVD SETUP 3 Calls the Sound Effects Menu. (page 74) DVD SETUP 1 screen 4 Calls the Setup Menu. -
Page 55: Displaying The Dvd Setup 3 Screen
Setup Menu Displaying the DVD SETUP 2 screen p Displays the Parental Lock screen.* OFF) (See <Parental Level Setup>, page 57) q Sets an angle mark display. ( w Selects the screen display mode.* 16:9) "16:9": Displays wide pictures. DVD SETUP 2 screen "4:3 (LB)": Displays wide pictures in the Letter Box format (having black stripes at the top MENU... -
Page 56: Language Setup
Language Setup Abbreviation Language Abbreviation Language Latvian, Lettish Afar Malagasy Selects a language you use for the speech and Abkhazian Maori Afrikaans menus. Macedonian Amharic Malayalam Arabic Display the Language Setup screen Mongolian Assamese Moldavian Aymara See <Displaying the DVD SETUP 1 screen> (page Marathi Azerbaijani 54) and select a language you wish to use. -
Page 57: Parental Level Setup
Before Use Setup Menu Parental Level Setup Display the Parental Level Setup screen Sets a parental level. Enter Display the Parental Level code number screen Return (Page 55 p) Parental Pass Cancel Level 5 Level 5 1 Sets a parental level. Enter Clear 2 Returns to the DVD SETUP 2 screen. -
Page 58: System Setup
System Setup You can set up the system parameters. Displaying the System 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. System Set Up 3 Calls the Sound Effects Menu. (page 74) System 1 screen 4 Calls the Setup Menu. -
Page 59: Displaying The System 2 Screen
Setup Menu Displaying the System 2 screen 9 Sets a music CD playback. ( "1": Automatically recognizes and plays back an MP3/WMA disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD. Select "2" if you wish to play a music CD System 2 screen having a special format or if you cannot play a disc in the "1"... -
Page 60: Av Interface
4 Calls the Setup Menu. 5 Selects a navigation system connection. ( RGB) MENU Navigation "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable. AV-IN1 Name "AV-IN1": Allows a third-party navigation system to VIDEO1 connect via the AV INPUT1 port. -
Page 61: Displaying The Av I/F 2 Screen
Before Use Setup Menu Displaying the AV I/F 2 screen p Sets a method to switch to the rear view camera video display. ( Off) "On": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse". -
Page 62: User Interface
User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. User Interface 3 Calls the Sound Effects Menu. (page 74) User I/F 1 screen 4 Calls the Setup Menu. -
Page 63: Displaying The User I/F 3 Screen
Setup Menu e Sets an on-screen display of the TV screen. Auto) (when the optional accessory TV tuner in connected only) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. r Displays the User I/F 1 screen. -
Page 64: Touch Panel Adjustment
Control during DVD Video, DVD Audio or Video CD Playback Touch Panel Adjustment Adjust the positions You can adjust the touch panel operations. Display the Touch Panel Adjust screen Touch the center of left lower and right upper when requested. Touch is not shown, touch Touch... -
Page 65: Clock
3 Calls the Sound Effects Menu. (page 74) 4 Calls the Setup Menu. 5 Clock time display. KVT-837DVD (24-hour Clock display) KVT-847DVD/867DVD (12-hour Clock display) 6 Adjusts hours. 7 Adjusts minutes. 8 Sets "00" minute. Setup examples: 3:00~3:29 ➔ 3:00 3:30~3:59 ➔... -
Page 66: Security Code Setup
Security Code Setup Start the security code registration You can set a security code to protect your receiver system against theft. PassWord Cancel • When the Security Code function is activated it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport"... - Page 67 Setup Menu If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code — You must enter the same security code as that you have entered in Step 3 above. Enter the security code Enter Now, you can use your Receiver.
-
Page 68: Set Up Memory
1 Recalls the memorized settings. Set Up Memory 2 Memorizes the current Audio Set Up and AV Audio Set Up and AV Interface settings can be Interface settings. memorized. The memorized settings can be recalled 3 Clears the currently memorized settings. at any time. - Page 69 Setup Menu English...
-
Page 70: Tv Setup
TV Setup <Function of KVT-837DVD (PAL TV type only)/847DVD/867DVD> The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) Displaying the TV1 Area Set Up screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. -
Page 71: Rds Setup
Setup Menu RDS Setup <Function of KVT-837DVD> The related RDS parameters can be set. Displaying the RDS Set Up1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. RDS Set Up 3 Calls the Sound Effects Menu. (page 74) RDS Set Up1 screen 4 Calls the Setup Menu. -
Page 72: Amp Control
Setup Menu AMP Control Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only) Displaying the AMP Control screen 1 Adjusts the volume. 2 Calls the Setup Menu. 3 Calls the Sound Effects Menu. (page 74) 4 Returns to the Control screen of the previous AMP Control screen source. -
Page 73: Muting Audio Volume Upon Reception Of Phone Call
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen MENU MENU... -
Page 74: Sound Effects Menu
SCRL TIME Title 1 Chap T 0:05:20 13:50 KENWOOD Displaying the Sound Effects Menu screen 1 Adjusts the volume. 2 Calls the Sound Effects Menu. 3 Calls the Setup Menu. (page 47) 4 Returns to the Control screen of the previous Sound Effects screen source. -
Page 75: Audio Control
Audio Control You can adjust the front and rear and right and left audio balance. Displaying the Audio Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Audio Control 3 Calls the Setup Menu. (page 47) Audio Control screen 4 Calls the Sound Effects Menu. -
Page 76: Equalizer
Before Use Equalizer You can set up the equalizer. Displaying the Equalizer screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Equalizer 3 Calls the Setup Menu. (page 47) Equalizer screen 4 Calls the Sound Effects Menu. 5 Adjusts the bass boost of the B.M.S power amplifier MENU BMS AMP Bass... -
Page 77: Parametric Equalizer
Sound Effects Menu Parametric Equalizer Set a gain You can manually set the equalizer curve by adjusting the center frequency, gain and Q value. Display the Parametric Equalizer screen Set a Q value P-EQ Parametric Equalizer Flat Close the Parametric Equalizer screen Return 80Hz 315Hz... -
Page 78: Surround Control
Before Use Surround Control You can set up the sound field. Displaying the Surround Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Surround Control 3 Calls the Setup Menu. (page 47) Surround Control screen 4 Calls the Sound Effects Menu. -
Page 79: Surround Control Adjustment
Before Use Sound Effects Menu Surround Control Adjustment • You cannot use the <Surround Control Adjustment> You can adjust the sound field. during playback of Multi channel source, "dts", and "Dolby Digital". Display the Surround Control screen • You cannot use the <Surround Control Adjustment> when the sound field of "Dolby PLII Movie", or "Dolby Adjust PLII Matrix"... -
Page 80: Srs Wow Control
SRS WOW Control You can set up the SRS WOW effect. Displaying the SRS WOW Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. SRS WOW 3 Calls the Setup Menu. (page 47) SRS WOW Control screen 4 Calls the Sound Effects Menu. -
Page 81: Srs Wow Uesr Setup
Sound Effects Menu SRS WOW User Setup Display the SRS WOW Adjust screen Adjust SRS WOW Adjust screen SRS WOW Adjust TruBass 3 FOCUS 5 SRS 3D 1 Return 1 Adjusts the volume. 2 Selects a speaker to be set (Front, Rear or Center speaker). -
Page 82: Position
Position You can adjust the sound effects according to your listening position. Displaying the Position screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Position 3 Calls the Setup Menu. (page 47) Position screen 4 Calls the Sound Effects Menu. -
Page 83: Position Fine Control
Sound Effects Menu 1 Center speaker Position Fine Control 2 Left front speaker You can fine-adjust your listening position. 3 Right front speaker 4 Left rear speaker Display the Position Fine Control screen 5 Right rear speaker 6 Subwoofer Adjust Set a delay time Position Fine Control screen Position Fine Control... -
Page 84: Zone Control
Sound Effects Menu Zone Control You can set the front and rear audio source. Displaying the Zone Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Zone Control 3 Calls the Setup Menu. (page 47) Zone Control screen 4 Calls the Sound Effects Menu. -
Page 85: Glossary
Glossary DVD: Digital Versatile Disc Title number (DVD) A type of disc which contains recording of audio/ The title is the largest unit of video and audio video packaged media with high video and audio recorded in a DVD. It usually corresponds to a quality, such as a movie, featuring large recording single movie of video software or an album (some- capacity and digital signal processing capability. -
Page 86: Troubleshooting Guide
Troubleshooting Guide Some system functions are limited to control depending on your setup. • Zone cannot be set. • The "Rear Bass Boost" of Surround Control Adjust cannot be set. The rear speakers have been set to • The rear speakers of DTA cannot be set. "NONE"... - Page 87 What might appear to be a malfunction in your unit may just be the result of slight misopera- tion or miswiring. Before calling service, first check the following table for possible problems. ✔ The parking brake is not engaged. General For safety reasons no television/video images The power does not turn on.
- Page 88 The sound quality is poor or distorted. The voice (or subtitle) language cannot be ✔ One of the speaker wires is being pinched by a changed. ✔ screw in the car. The DVD disc being played does not contain Check the speaker wiring. the recording of more than one audio (or subtitle) language.
- Page 89 Troubleshooting Guide MP3/WMA source The specified disc does not play, but another one plays instead. Cannot play an MP3/WMA. ✔ The specified CD is quite dirty. ✔ The media is scratched or dirty. Clean the CD. Clean the media, referring to the Disc cleaning ✔...
- Page 90 Mecha Error The disc player is malfunctioning. ] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error The unplayable discs is inserted. Read Error The disc is upside-down.
-
Page 91: Specifications
LM Tuner section (KVT-837DVD) : 16/20/24bit Frequency range (9kHz) : 153kHz~281kHz Usable sensitivity : 45μV WM Tuner section (KVT-837DVD) Frequency range (9kHz) : 531kHz~1611kHz Usable sensitivity : 25μV AM Tuner section (KVT-847DVD/867DVD) Frequency range (9kHz) : 531kHz~1611kHz Usable sensitivity : 28dBμ English... - Page 92 Specifications Video section Color system of external video input : NTSC/PAL External video input level (RCA jacks) : 1Vp-p/75Ω External audio max input level (RCA jacks) : 1V/22kΩ Analog RGB input : 0.7Vp-p/75Ω Audio section Maximum Power (Front&Rear) : 50W×4 Full Bandwidth Power (Front&Rear) (at Less than 1%THD) : 22W×4 Preout level (V)
- Page 93 The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.