Table of Contents
Advertisement
Introduction
Congratulations on the purchase of the Toshiba NetPac
Wireless System!
The Toshiba NetPac Wireless System is a communications
solution that is designed to monitor and control a network of
Toshiba's 7-Series and 9-Series Adjustable Speed Drives
(ASDs). The wireless system consists of three components: a
USB Transceiver Module, an ASD Transceiver Module
(one for each ASD within the network), and the software
CD.
The USB Transceiver Module communicates with the ASD
Transceiver Module. The USB module connects to the USB
port of the PC that will be used for system monitoring and
control via the ASD PRO Software.
The ASD Transceiver Module allows all system nodes
(personal computer [PC] and all ASDs) to communicate with
each of the other nodes in the network via its mesh network
design. Wireless communication is accomplished via spread
spectrum using the 802.15.4 protocol.
Once properly configured, and using the ASD PRO
software, system changes, node monitoring, and
configuration updates may be accomplished remotely via a
PC. See the ASD PRO Software Manual (P/N 59443) for
additional information on using ASD PRO Software.
To maximize the abilities of your Toshiba NetPac Wireless
System, a working familiarity with this guide will be
required. This guide has been prepared for the installer, user,
and maintenance personnel. This guide may also be used as a
reference guide or for training. With this in mind, use this
guide to develop a system familiarity before attempting to
install or operate the system using the Toshiba NetPac
Wireless System.
Advertisement
Table of Contents
