Pause Live Tv - Pioneer DVR-LX61D Operating Instructions Manual

Recording
STOP REC
8 Press to stop recording.
• If you set the recording time in the
previous step, you can still stop the
recording anytime by pressing
STOP REC.
• Recording will stop automatically when
there is no more space on the HDD/DVD,
or after 12 hours of HDD recording
(whichever is sooner).
Tip
• During recording you can turn on/off the
SCART loop through function. During
recording, press the front panel CH +
button to switch to SCART THRU (loop
through on), or CH – to switch to SCART
NORM (loop through off). Loop through
is automatically reset to off after
recording has finished. Note that you
can't switch loop through on if recording
from the AV1 (RGB)-TV connector.

Pause Live TV

HDD
The Pause Live TV feature lets you effectively
pause a TV programme you're watching.
When you're ready to resume watching, just
press the  PLAY button.
Setting up for Pause Live TV
You can use the Pause Live TV feature with
an AV Link-compatible TV connected using a
SCART cable (see TV tuner setup for Pause
Live TV below), or using this recorder's
internal tuner (see Using the recorder's
internal tuner for Pause Live TV on page 68).
Note
1 • Not all TVs support this feature. Check the instructions that came with your TV if you are unsure.
• This feature will not work unless your TV is compatible with AV Link. See the operating instructions that came
with your TV if you're unsure about your TV's compatibility with this feature.
TV tuner setup for Pause Live TV
To use this feature with an external TV tuner,
the recorder must be connected to your TV
using a SCART cable, and the AV. Link
setting (page 148) should be set to This
1
See also Pause Live TV on
Recorder Only.
page 149 for more on this.
In order to use Pause Live TV, make the
following connections and settings.
• Pause Live TV will not work as expected
when watching TV via an external
component such as a VCR or digital
tuner. It only works with the channel
selected on the TV.
Important
• Pause Live TV only works with the built-in
A.TV (analog) tuner. It does not work with
the D.TV tuner or the external inputs.
Make sure the Auto Channel Setting is
set to Download from TV (see Auto
Channel Setting on page 138).
1 Connect this recorder to your TV with
a SCART cable.
2 Press HOME MENU.
3 Select 'Setup' > 'Initial Setup' >
'Options2' > 'Pause Live TV' > 'TV's
Tuner'.
4 Select 'Setup' > 'Initial Setup' >
'Analog Tuner' > 'Auto Channel Setting'
> 'Download from TV'.
• If the Download from TV option appears
grayed out, check the connections to
your TV and try again.
• Depending on your TV, you might have to
switch off and unplug it for a few
moments before plugging it back in and
switching it on again.
5 Follow the on-screen instructions.
07
67
En