Finding Motion (Only Nvr Recordings); Finding Logbook Entries; Window - Bosch MBV-BPRO-40 Operator's Manual

Video management system
Table of Contents

Advertisement

28
en | Managing recorded videos
6.
7.
8.11

Finding motion (only NVR recordings)

Main window >
Main window >
You can check the video in the selected Image pane for motion.
To find motion:
1.
2.
3.
4.
5.
6.
7.
8.12

Finding Logbook entries

Main window > Tools menu > Find in Logbook... command > Select Search Parameters dialog
box
or
Main window > Tools menu > Find in Logbook... command > Please select a Server dialog box
> Select Search Parameters dialog box
In the Logbook, you can search for particular events, alarms, devices, and strings of events.
You can save the search criteria as a filter.
To find Logbook entries:
1.
2.
2012.07 | V1 | Operation Client
Click Search to start the Forensic Search.
The
window with the matching entries is displayed.
For playing the corresponding video, double-click the entry. The corresponding video is
displayed.
>
tab > Select an Image pane
Select the Image pane where you want to find motion.
Using the Hairline, select the time period on the Timeline.
Click
. The Motion Search dialog box is displayed. The selected time period is
copied to the Start: and End: fields.
If required, change the values.
If required, select Display Grid. A grid is placed above the image. You can select every
cell in the grid for searching.
Select the cells you want to check for motion. To select the cells, drag an area.
The selected area is displayed in half transparent yellow.
To clear a selected area, drag the selected area again.
Click Start Search. The search results for the selected Image pane are listed in the

window.

For playing the corresponding video, double-click the entry. The corresponding video is
displayed.
In an Enterprise System, select the desired Management Server for searching.
In the Filter list, select a pre-defined filter if available.
A filter contains all the settings that you make in this dialog box.
You can save, load, and delete the selected filter. You can reset the settings of the
selected filter.
tab > Select an Image pane
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

Table of Contents