Bosch VG5 600 Series User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. VG5 600 Series
  6. User manual

Bosch VG5 600 Series User Manual

Analog ptz camera
Hide thumbs Also See for VG5 600 Series:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
AutoDome 600 Series Analog PTZ Cam-
era
VG5 600 Series
en
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch VG5 600 Series

Summary of Contents for Bosch VG5 600 Series

  • Page 1 AutoDome 600 Series Analog PTZ Cam- VG5 600 Series User Manual...

  • Page 3: Table Of Contents

    Using a Pelco Controller Pelco Protocol Mode 4.2.1 Hardware Configuration 4.2.2 Pelco Keyboard Commands 4.2.3 Pelco Keyboard Commands 4.2.4 Special Preset Commands Pelco On-Screen Menus Setup Menu 5.1.1 Command Lock (locked) Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 4 AutoHome Recalibration Commands and Settings 7.9.1 AutoHome Recalibration Operation 7.9.2 Using the AutoHome Recalibration Troubleshooting Guide VG5 AutoDome Operation and Control VG5 Series AutoDome Audio User Command Table Appendix: FastAddress Conversions Index F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 5: Getting Started

    Using the AutoDome Configuration Tool software running on a PC with Bilinx or the RS- 232/485 communication protocol. Refer to the CTFID User Manual for instructions. – Using a PC-based graphical user interface (GUI) such as the Bosch DiBos 8 software. Refer to the DiBos 8 User Guide for instructions. Bosch Security Systems, Inc.

  • Page 6: Basic Keyboard Operation

    The Enter key can also be labeled with the ∞? symbol. For example, the keyboard command to make the AutoDome pan 360º continuously is: ON-1-ENTER (press the ON key, then press the number 1 key, and then press ENTER.) F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 7: Setting The Camera Address

    Follow the on screen instructions. You receive an on-screen confirmation when the FastAddress is complete. NOTICE! FastAddress is stored in nonvolatile memory and does not change if the power is turned off or if the default settings are restored. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 8: Setting Passwords

    Tilt the joystick up or down to choose a number. Tilt the joystick right to move to the next number position. Follow the on-screen instructions and save the password. You receive an on-screen confirmation. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 9: On-Screen Display Menu Navigation

    Use the joystick to navigate through the menu and the Focus/Iris keys to make a selection. Setup Menu Exit... Camera Setup Lens Setup PTZ Setup Display Setup Communication Setup Alarm Setup Language Advanced Diagnostics Focus / Iris: Select Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 10: Camera Setup Menu

    * Night Mode: AUTO * Night Mode Color: * Night Mode Threshold: * Pre-Comp Restore Defaults... * = Factory Setting ** = WDR camera only Focus / Iris: Select F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 11 Backlight Comp Improves image quality when the On or OFF background illumination level is high. Turns the wide dynamic range feature ON, OFF, or Auto on or off. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 12: Lens Setup

    CONSTANT * Auto Iris Level: * Focus Speed: * Iris Speed: * Max Zoom Speed: FAST * Digital Zoom: Restore Defaults * = Factory Setting Focus / Iris: Select F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 13: Ptz Setup Menu

    2 min * AutoPivot: * AutoDome Orientation NORMAL * Freeze Frame on Preposition Tilt Up Limit... Restore Defaults * = Factory Setting Focus / Iris: Select PTZ Menu Choices: Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 14 North compass heading. Refer to Section 7.8 Azimuth, Elevation, and Compass Directions, page 52. Restore Defaults Restores the default setting for this menu only. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 15: Display Setup Menu

    Refer to Section 7.8 Azimuth, Elevation, and Compass Directions, page 52. Compass Displays compass heading. On: Displays compass heading. Off: Hides compass heading. Refer to Section 7.8 Azimuth, Elevation, and Compass Directions, page 52. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 16 Section 3.3 Specifying a Shot or a Sector Title, page 27, for instructions. – Clear Scene to delete the selected scene title. Restore Defaults Restores the default setting for this menu only. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 17: Communication Setup Menu

    57600. Then follow the OSD to confirm the selection. Bilinx Turns on Bilinx control communication. Toggles ON or OFF. (Only available when not connected to a Bilinx data interface unit.) Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 18: Alarm I/O Setup

    Alarm inputs 1 and 2 provide tamper detection, if programmed as supervised, for breaks or shorts in an alarm circuit. See the VG5 AutoDome Installation Manual for wiring instructions. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 19 Transmit: Transmits a message back to the head end (available with RS-232 serial connections, Bilinx, and IP AutoDome models). AutoTrack: Turns AutoTrack on or off as an output. NONE: No command defined. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 20: Rule Setup Menu

    Once an alarm is configured with valid inputs and outputs, it can be turned on or off (enabled or disabled) through its configuration menu. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 21 You can include up to four (4) Input and Output events in a single rule. Each input and output, however, must be true for the alarm's rule to be valid and enabled. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 22: Language Menu

    Advanced Feature Setup Exit... * Stabilization * AutoTrack Sensitivity Auto AutoTrack TImeout AutoTrack TImeout Period 5 min * Camera Height: Virtual Masking... Restore Defaults... Focus / Iris: Save and Exit F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 23: Diagnostics Menu

    Loss Home Events Home Position Good Restart Events: Low Volt Events: Power Up Events: Video Loss Events: Total Time On 0hr 0min Focus / Iris: Save and Exit Diagnostic Events Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 24 Displays the number of times the AutoDome dropped below the acceptable voltage limit. Power Up Events Displays the number of power up events. Video Loss Events Displays the number of time that video was lost. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 25: Alarm Status Submenu

    Saves and exits the menu. Alarm Input 1...7 Displays the status of alarm inputs 1 through 7. High Open (Normally Open) Closed (Normally Closed) Alarm Output Displays the status of the alarm output. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 26: Common Autodome User Commands (Unlocked)

    | Common AutoDome User Commands (unlocked) AutoDome 600 Series Analog PTZ Camera Common AutoDome User Commands (unlocked) This chapter details the commonly used Bosch keyboard setup commands. See Section 6 Keyboard Commands by Number, Page 41, for a complete list of commands. Setting AutoPan Mode AutoPan mode pans the AutoDome camera 360º...

  • Page 27: Specifying A Shot Or A Sector Title

    To change the dwell period of a tour: Press ON-15-ENTER to access the Tour Period Menu. Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 28: Programming The Inactivity Operation

    Press ON-101-ENTER to start recording the tour. Press OFF-101-ENTER to stop the tour. To playback Recorded Tour B: Press ON-52-ENTER to begin continuous playback. Press OFF-52-ENTER or move the joystick to stop playback. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 29: Alternative Control Protocols

    American Dynamics Manchester system sends out an address of 1, while the Sensormatic RS- 422 system with an address of 100 also sends out an address of 1. It is NOT NECESSARY to convert these numbers with the Bosch FastAddress method. The camera automatically detects the address being transmitted by the Sensormatic RS-422 control system and adjusts the camera accordingly.
  • Page 30 When completed, the FastAddress number entered must match the Unique Identifier displayed. See example as follows: Enter FastAddress FastAddress: Not Set Unique Identifier: 200668 200668 Continue... Exit... Joystick: Match Identifier F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 31 Move the joystick to highlight Exit Without Change to exit the FastAddress menu without saving any changes. FastAddress FastAddress: Not Set Save “##” as FastAddress Clear Current FastAddress Exit Without Change Focus/Iris: Select Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 32: Using A Pelco Controller

    Use the keyboard to enter the FastAddress number. Then, press the Camera button. Note: You must first clear an assigned FastAddress number to use the number for a different VG4 AutoDome. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 33: Pelco Protocol Mode

    RS-485 (outward toward the LED lights). This switch is located on the bottom of the AutoDome CPU board, under the camera head and next to the LED lights. See Figure 4.1. Figure 4.1 RS-232/RS-485 Selection Switch CPU Module Switch Location LEDs RS485 Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 34: Pelco Keyboard Commands

    4 – Aux On / Aux Off Press Activates / deactivates alarm relay. 91 – Aux On Press Activate Zone Scan (display zone titles). 92 – Aux On Press Deactivate Zone Scan (re-move zone titles) F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 35: Special Preset Commands

    99-PRESET Starts an AutoScan NOTICE! Some Pelco controllers do not support all the preset command numbers. Consult the specific Pelco controller's documentation for supported preset commands. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 36: Pelco On-Screen Menus

    Accesses the tours, tour periods, scan speed, edit presets, limit stops, recording, and AutoPivot settings. Edit Password Changes the password. (locked) FastAddress (locked) Sets or changes a camera address. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 37: Command Lock (Locked)

    If the Command Lock is set to ON and you press Focus or Iris on a locked command, the AutoDome displays the on-screen message: “Command is Locked.” 5.1.2 Bosch Menu (locked) The Bosch Menu allows full access to the AutoDome main Setup Menu and all AutoDome configuration settings. Pelco menu Bosch menu...

  • Page 38: Ptz Setup (Unlocked)

    * Tour 2 Period: 5 sec * Scan Speed 30 deg/sec Edit Presets... * Limit Stops: * Recording: “A” * Autopivot: * = Factory Setting Focus / Iris: Select F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 39: Other Menus

    Restores all settings to their original factory default (locked) settings. Reset All Memory Restores all settings to their original factory default (locked) settings and clears all user programmed settings such as preset scenes and recordings. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 40: Keyboard Commands By Number

    Motion–Activates Night Mode before slow shutter, preserving full-frame integration as light is reduced. Color–Activates slow shutter before Night Mode, preserving color longer as light is reduced. On/Off On Screen Display On–Enable Off–Disable F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 41 Off–Normal On/Off Lens Polarity Menu On–Reverse Off–Normal On/Off Set Azimuth Zero Point Sets the zero degree pan position. Refer to Section 7.8 Azimuth, Elevation, and Compass Directions, page 52. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 42 Changes the homing recalibration interval. Intervals are in 6-hour increments up to 72 hours. Each On – increases interval by 6 hours Each Off – decreases interval by 6 hours F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 43 Enters the Standard Tour Scene menu Shot Edit Tour 2 (Custom) Enters the Custom Tour Scene menu Set/Shot 901-999 Adds/Removes a Preposition Shot Set ###–Adds preset from Tour 1 Shot ###–Removes preset Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 44: Advanced Features

    Ensure Output 5 is set to OSD. (This is the default setting for Output 5.) Set Output 6 to Shot 7. Set Output 7 to Transmit (a Bilinx signal to the head end). F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 45 Set the third output to AutoTrack and select Latched. Set the fourth output to Transmit (a Bilinx signal to the headend). Enable the alarm Rule: – Highlight Enabled and select YES. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 46 Figure 7.2 Expanded Alarm Group Expand Output Options; then click Output Option 5. Select Tracking from the Type drop-down list. Click Output Option 6. Select Shot from the Type drop-down list. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 47 15. Select Tracking from the Output Option drop-down list. This option instructs the AutoDome to activate the AutoTrack feature after the input alarm is triggered and after the AutoDome moves to pre-position 1. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 48: Autotrack Operation

    Return to Previous Aux), if AutoTrack is programmed for these activities. NOTICE! For proper operation AutoTrack requires that the camera height be set in the software. Open the Bosch Main menu, select the Advanced menu and select Camera Height to enter the height. 7.2.1...

  • Page 49: Autotrack Optimization

    – Use the Virtual Masking feature (see Section 7.3 Virtual Masking, page 50) to mask unwanted motion from trees or cars. Bosch recommends that you draw the virtual mask 10% larger than the object to be masked. – Avoid neon lights, flashing lights, night time lights, and reflected light (from a window or mirror, for example).

  • Page 50: Virtual Masking

    AutoTrack Sensitivity setting to reach the optimal results. Virtual Masking Virtual Masking is a unique Bosch technology that allows you to create an “invisible” area that ignores unwanted background motion. These invisible masks are similar to privacy zones, except that the AutoDome AutoTrack and Motion Detection algorithms can see them.

  • Page 51: Motion Detection With Region Of Interest

    Image Stabilization Image Stabilization becomes increasingly important as zoom ranges are extended. The advanced image stabilization algorithms of the VG5 Series AutoDome eliminate camera shake for exceptional image clarity. Bosch achieves this clarity without reducing camera sensitivity or picture quality. –...

  • Page 52: Azimuth, Elevation, And Compass Directions

    Press OFF-90-ENTER to turn off the command lock (if active). Press ON-94-ENTER to set the Azimuth Zero point. CAUTION! Bosch recommends that only the installer calibrate the Azimuth Zero point. A recalibration to the Azimuth Zero point may cause inaccurate compass headings. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 53: Displaying Azimuth, Elevation, And Compass Headings

    Each On – increases offset time by 4 hours Each Off – decreases offset time by 4 hours Note: The offset time does not take effect until the Homing Calibration is enabled. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 54: Autohome Recalibration Operation

    For example, to set the Initial Offset Time to 8 hours, issue the AUX ON 684 command twice. Issue the AUX ON 681 command to enable the recalibration routine. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 55: Troubleshooting Guide

    – Try cycling the AutoDome power off and on. If the Red LED is off, then: If using a Bosch Pendant Power Supply Box: – Check that Green LED in Power Supply Box is on. This LED indicates mains power through the transformer.
  • Page 56 (the maximum distance for RS-232 is 50 feet). See the VG5 AutoDome Installation Manual. If O.K., then: – Check that all wiring meets Bosch recommended standards and specifications. See the VG5 AutoDome Installation Manual. Camera moves when – Check that the camera address is properly set (ON-997-ENTER). If the camera address moving other is not set, the AutoDome responds to control commands to any camera on the system.
  • Page 57 – Remove the network cable from the interface board RJ-45 connector. If O.K., then: – Contact Bosch Technical Support. Day/Night camera – Check that the Day/Night mode is set to AUTO (ON-56-ENTER). does not switch If O.K., then: automatically when –...
  • Page 58 Check all wiring and connector pins to the heater module. Low Voltage flashing – If using a non-Bosch power supply, confirm that it meets the Bosch AutoDome power on monitor display ratings. See the AutoDome Datasheet for specifications. If O.K., then: –...

  • Page 59: Vg5 Series Autodome Audio

    Audio Connections with an VG5 600 Series AutoDome In this illustration the VG5 600 Series AutoDome connects to a Bosch Video/Audio IP Encoder via a coaxial cable. The computer that plays the audio is connected to the encoder via an Ethernet cable.
  • Page 60 Verify the cable type and installation used for audio connections between the microphone and the VG5 AutoDome. – Cable type: Coaxial – Cable length: 10 m (33 ft), maximum Refer to the VG5 AutoDome Installation Manual for more information. F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 61 Verify the cable type and installation used for audio connections between the microphone and the VG5 AutoDome. – Cable type: Coaxial – Cable length: 10 m (33 ft), maximum Refer to the VG5 AutoDome Installation Manual for more information. Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 62: User Command Table

    Off–No confirmation message issued On/Off Command Lock/Unlock On–Lock on Off–Lock off On/Off Display Azimuth/Elevation Readings On–Displays azimuth/elevation readings Off–Hides azimuth/elevation readings On/Off Display Compass Heading On–Displays compass heading Off–Hides compass heading F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 63 Enters the Standard Tour Scene menu Shot Edit Tour 2 (Custom) Enters the Custom Tour Scene menu Set/Shot 901-999 Adds/Removes a Preposition Shot from Set ###–Adds preset Tour 1 Shot ###–Removes preset Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...

  • Page 64: Appendix: Fastaddress Conversions

    Group 7 Group 8 10-99 10-99 109- 10-99 208- 10-99 307- 10-99 406- 10-99 505- 10-99 604- 10-99 703- 10-99 Table 1.2 Address Conversion Table for AD/Sensormatic RS-422 Systems F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.

  • Page 65: Index

    11 auto focus 13 shutter 12 auto iris 13 synchronization menu 11 auto iris level 13 threshold 12 Auto SensUP 12 white balance 11 autobaud 17 Command key 6 Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 66 52 Configuration Tool for Imaging Devices 24 Enter key 6 configuring extended ATW 11 alarms 10 camera height 23 rules 20 constant focus 13 constant iris 13 CTFID 24 F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 67 SET-802-ENTER 8 microphone 60 Shot 26 motion detection 18 Shot Shot 6 networking Language menu 10 baud rate 17 night mode 12 color 12 threshold 12 normally closed circuit 19 Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 68 Pelco Setup menu ack alarm 37 Bosch menu 36 camera setup 36 command lock 36 FastAddress 36 password 36 reset alarm 37 Pelco-D 33 Pelco-P 33 physical inputs 18 F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 69 Display 10 restart events 24 Language 10 RS-422 29 Lens 10 PTZ 10 sharpness 11 Shot 6 clear 26 Set 26 store 26 view 26 Show 6 Show Shot 6 Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 70 14 Tour 2 period 14 Tour Period menu 27 user commands 26 video loss events 24 virtual masking 23 voltage limit 24 white balance 11 zero pan 35 F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 71 AutoDome 600 Series Analog PTZ Camera Index | en Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06...
  • Page 72 | Index AutoDome 600 Series Analog PTZ Camera F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
  • Page 74 Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2012...

This manual is also suitable for:

Autodome 600 series

Table of Contents