Installation; Installing The Dedicated Usb Driver Software - Sony SRP-X700P Operating Instructions Manual

Installation

The dedicated USB driver software is necessary to
connect the SRP-X700P Manager and User Control
Panel to the SRP-X700P.
Installing the Dedicated USB
Driver Software
• The dedicated USB driver software is contained in the CD-ROM
supplied with the SRP-X700P.
• Install the dedicated USB driver software by following the
instructions shown on the screen. Some computer may reboot
when the dedicated USB driver software is installed.
1 Turn on the main power of the personal computer and start
Windows.
2 Insert the supplied CD-ROM into the CD-ROM drive of the
personal computer.
3 Turn on the main power of the SRP-X700P. Connect the
connector on the front or rear of the SRP-X700P to the USB
connector of the personal computer using a USB cable.
4 The USB device of the SRP-X700P is recognized and the
dialog box [This wizard searches for new drivers for:] appears.
Click [Next >].
5 Select [Search for the best driver for your device.
(Recommended).] and click [Next >]. (Fig. 1)
Fig. 1
6 Click on the check box [Specify a location:] and click
[Browse...]. Specify [Driver] folder of the supplied CD-ROM
and click [Next >]. (Fig. 2)
Fig. 2
7 When the screen [Windows driver file search for the device:]
appears, click [Next >].
8 When the screen [Windows has finished installing the software
that your new hardware device requires.] appears, click [Finish].
9 Because the USB port of the SRP-X700P is recognized as
[Unknown Device], click [Next >].
4
0 Select [Search for the best driver for your device.
(Recommended).] and click [Next >]. (Fig. 3)
qa Click on the check box [Specify a location:] and click
[Browse...]. Specify [Driver] folder of the supplied CD-ROM
and click [Next >]. (Fig. 4)
Select
qs When the screen [Windows driver file search for the device:]
appears, click [Next >].
Click
qd When the screen [Windows has finished installing the software
that your new hardware device requires.] appears, click [Finish].
Installation of the dedicated USB driver software is now complete.
Click on the
check box
Click
Fig. 3
Fig. 4
Select
Click
Click on the
check box
Click