Kenmore ELECTRIC WALL OVEN Installation Instructions Manual page 7

6.For t ypical u nder c ounter i nstallation o fanelectric b uilt-inoven seeFigure b elow.
Only certain cooktop models m ay beinstalled o vercer-
tainbuilt-in electric o ven models. Approved c ooktops
andbuilt-in ovens a relisted bytheMFG IDnumber a nd
product code (see theinsert s heet i ncluded i nthelitera-
turepackage a ndcooktop installation instructions forthe
dimensions).
To reduce the risk of
personal injury and
tipping of the wall
oven, the wall oven
must be secured to
the cabinet (s) by
mounting brackets.
208/240 Volt junction box.
for built-in oven.
Approx. 3"
(7.5 cm)
Cabinet side filler panels are
necessary to isolate the unit
from adjoining cabinets. Cabinet
side filler height should allow for
installation of approved cooktop
models
36" Min.
(91.4 cm) Min.
Use 3/4" (1.9 cm) plywood, installed
on two runners, flush with toe plate.
Basemust be capable of supporting
200 )ounds (90 kg).
Cut an opening m wood base minimum 9" x 9"
(23 X 23 cm), 2" (5 cm) from left side filler
panel, to route armoured cable to junction box,
4-1/2" (11.5 cm) Max. distance*
* If no cooktop is installed directly over
the oven unit, 5" (12.7 cm) maximum
is allowed above the floor.
Figure 9 - TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRICBUILT-IN OVEN
WITH AN ELECTRICCOOKTOP MOUNTED ABOVE