Chapter 14
Routing
Modifying BGP on a Chassis
The BGP Modify Window allows the user to modify the BGP Configurations on the device. To modify
a BGP process, proceed as follows:
Step 1
Open the BGP Configuration window. See
Window" section on page 14-3
Step 2
Choose a chassis from the left side of the window.
Note
Step 3
Click on the Modify button. The BGP Modify window appears.
Note
Figure 14-3 BGP Modify Window
OL-4455-01
for further details.
You can choose multiple chassis (from the chassis list) which allows you to launch the BGP
Modify window for the selected chassis.
The Modify button is active only when there is BGP running on the device.
"Viewing the BGP Details Tab on the BGP Configuration
Cisco 12000/10700 v3.1.1 Router Manager User Guide
BGP Configuration
14-7