About The Mic Shielded Composite Cable; About Alarm Inputs And Outputs - Bosch MIC612 Installation Manual

16 en | Installation Overview
3.3

About the MIC Shielded Composite Cable

MIC shielded composite cables are multi-conductor cables of various lengths (and gauges
ranging from 14 - 18) that provide all power, video, and telemetry connections between the
MIC PSU and the MIC camera. The cables are pre-made with a female-terminated 14-pin
connector at one end for attachment to the male connector installed into the base of the
camera. The other end of the cables has free (non-terminated) wires for wiring into terminals
in the MIC PSU.
Figure 3.6 Composite cable before connection to MIC612 camera
Figure 3.7 Composite cable connected to MIC612 camera
NOTICE!
Bosch does not recommend using the composite cable for distances greater than 25 m
between the MIC camera and the power supply.
To prevent water penetrating the composite cable connector threads, seal the 25 mm thread
at final installation using PTFE tape. Alternately, a suitable sealant may be liberally applied to
the thread prior to final tightening.
3.4

About Alarm Inputs and Outputs

The table below identifies the number of alarm inputs and outputs available with and without
an 8-input alarm card installed in the MIC PSU.
Alarm Card
Installed?
Yes
No
F.01U.249.416 | 2.0 | 2012.09
Number of Number of
Alarm Inputs Alarm Outputs
8 2
1 0
Installation Manual
MIC612 Thermal Camera
Bosch Security Systems, Inc.