Additional Features; Using The Secure Receiving Mode - Dell 1125 Mono Laser MFP User Manual

5. Press Scroll (<>) to select Delay Fax and press Select (P).
6. Enter the number of the remote machine using the number keypad.
To enter the number, you can use one, two, or three-digit speed dial or group dial numbers.
7. Press Select (P) to confirm the number on the display. The display asks you to enter another fax number.
8. Press Select (P) to enter the number.
OR
Press Scroll (<>) to select No and press Select(P).
9. Assign a name to the transmission using the keypad. For more information on how to enter the name using the number keypad, see
Keypad to Enter Characters.
10. Press Select (P). The display shows the current time and asks you to enter the start time when the fax is to be sent.
11. Enter the time using the number keypad. Select AM or PM if 12 hour time format is selected.
NOTE: The time format (i.e. 12 or 24 hour) is set during the initial startup step
NOTE: If you set a time earlier than the current time, the document may be sent at that time the following day.
12. Press Select (P) when the start time displays correctly. Data Entry Ok is displayed.
13. For documents loaded on the scanner glass, the display asks if you want to load another page. Select Yes to add. Otherwise, select No.
14. The document is scanned into the memory.
15. The printer returns to Standby mode and the fax is transmitted from memory at the selected time.
NOTE: If you want to cancel the delayed transmission, see
Additional Features
Protecting your Fax with a Passcode
Assign a passcode to the printer to protect it from unauthorized use.
Assigning a Passcode
1. Press Scroll (<>) to select Fax and press Select (P).
2. Press Scroll (<>) to select Advanced Fax and press Select (P).
3. Press Scroll (<>) to select Secure Receive and press Select (P).
4. Press Scroll (<>) to select On and press Select (P).
5. Enter a four-digit passcode and press Select (P).
6. Enter the same four-digit passcode to confirm and press Select (P).
7. Press Cancel (V) to return to Standby mode.
The Passcode is now set.

Using the Secure Receiving Mode

Changing the Clock
Clearing the Memory.
Using the Number
Mode.