Electrolux EIDW6405HT - Fully Integrated Dishwasher Service Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Dishwasher
  5. EIDW6405HT - Fully Integrated Dishwasher
  6. Service manual

Electrolux EIDW6405HT - Fully Integrated Dishwasher Service Manual

Electronic dishwasher
Hide thumbs Also See for EIDW6405HT - Fully Integrated Dishwasher:
Table of Contents

Advertisement

Quick Links

See also: Use and Care Manual
Electrolux
EFS - Dishwashing Systems Platform
Electrolux Professional
CONTENTS:
EDITION:
DOC. NO. 5956.446.06
SERVICE MANUAL
3. _ _
TANK
BOILER
3. _ _
TANK
BOILER
This document contains the instruction to change parameter settings of electronic
board by means of user interface.
06.2005
©Copyright 2005 by Electrolux Professional
3. _ _
TANK
BOILER
P.1/88

Advertisement

Table of Contents
loading

Related Manuals for Electrolux EIDW6405HT - Fully Integrated Dishwasher

Summary of Contents for Electrolux EIDW6405HT - Fully Integrated Dishwasher

  • Page 1 BOILER 3. _ _ TANK BOILER 3. _ _ TANK BOILER CONTENTS: This document contains the instruction to change parameter settings of electronic board by means of user interface. EDITION: 06.2005 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.1/88...

  • Page 2: Table Of Contents

    10.1 CODE Prog. TABLE 10.2 PROGRAMMING SHEETS 11. DEFAULT VALUES 12. USER INTERFACE AND MAIN BOARD CONNECTORS 12.1 MAIN MALFUNCTIONS NOT DUE TO THE MAIN BOARD 12.2 CONNECTORS LAYOUT 13. ALARM MESSAGES AND TROUBLESHOOTING ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.2/88...

  • Page 3: Keyboards

    Fig. 1.8 Decrease Parameter Value Next Parameter Family OR Confirm Value and go Increase Parameter Value (In setting mode only) to next Parameter (In setting mode only) (In setting mode only) ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.3/88...

  • Page 4: Undercounter Style

    Increase Parameter Value (in setting mode only) Fig.1.7 Decrease Parameter Value TANK (In setting mode only) BOILER Fig.1.8 Confirm Value and go to next Parameter TANK (in setting mode only) BOILER ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.4/88...

  • Page 5: Manual Activation Of Detergent And Rinse Aid Dispensers

    Close the door and press and hold down DRAIN and CYCLE INFINITE keys. A buzzer signal indicates the rinse pump activation and the display shows three blinking lines. Three beeps indicate the cycle end. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06...

  • Page 6: General Parameters

    Change duration (Tank LED indicates default). DEFAULT Fig. 3.6 Fig. 3.7 Fig. 3.8 Fig. 3.9 Cycle detergent dosage Change time activation Cycle rinse aid dosage Change time activation (Tank LED indicates default) ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.6/88...
  • Page 7 Suppose there is connected an external detergent dispenser with a probe into the tank. A typical setting could be: DIn= the dispenser is not activated during filling tank; DEt=181 the dispenser is supplied during washing phase and the probe automatically dose the right detergent amount. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.7/88...

  • Page 8: Counters

    Fig.4.1 Fig.4.2 Fig. 4.3 USER setting mode Next Family Counters Fam.: ENTER (press for 5s) Fig. 4.6 Fig. 4.7 Fig. 4.4 Fig. 4.5 CYCLES Thousand. Units. Next counter. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.8/88...

  • Page 9: Factory Parameters

    During tank warm-up, temperature must increase at least °C otherwise [°C] warning appears. Put 0 to disable warning. Tank Filling Timeout. If filling time is longer than alarm appears. [min] Put 0 to disable alarm. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.9/88...
  • Page 10 At the end the display will show again ‘FAC’ and by pressing CYCLE_2 key (Fig.4.9) is possible to change cycle duration (see next paragraph). Fig. 5.9 Fig. 5.10 Fig. 5.11 Factory setting mode Next Family Cycle 1 Family: ENTER ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.10/88...

  • Page 11: Cycle Setting

    Fig. 6.10 Cycle 1 Parameters. Wash duration [min]. Cycle 2 Parameters: ENTER … Fig. 6.11 Fig. 6.12 Fig. 6.13 Cycle 2 Parameters: Cycle 3 Parameters: Wash duration [min]. next Family ENTER ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.11/88...
  • Page 12 Electronic Dishwasher EFS – Dishwashing Systems Platform SERVICE MANUAL Electrolux Professional CYCLE DIAGRAM CYCLE TYME WASH Ln Sh PRE RINSE RINSE COLD RINSE DRAIN RINSE PAUSE FINAL PAUSE DETERGENT RINSE AID ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.12/88...

  • Page 13: Cy2 Cycle 2 Parameters

    This parameter allows having a different rinsing temperature for the [°C] third cycle. Only values above 45°C are allowed. Drain/Cleaning Cycle Parameters Factory Sym. Parameter Description Unit Default Initial Drain Phase Duration Final Drain Phase Duration ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.13/88...

  • Page 14: Other Parameters Dpa

    33 = MODEM GSM (DAAS 8E1) 48 = Hyper Terminal (8N1) Address. This parameter specifies the address of the appliance into the ‘HACCP_network’. Works only if ‘HACCP network’ is selected (see above parameter). ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.14/88...

  • Page 15: Cfg Configuration Parameters

    ALARMS ENABLE 0 = alarms disabled (to disable also warnings see 1 = alarms enabled; If this function is disabled, faults can be detected so display do not shows any alarm code. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.15/88...

  • Page 16: Dbg Parameters For Automatic Hood Type Dishwashers

    Parameter only valid for hood type models. Hood lifting motor absorption threshold. (50 units correspond to a current of approx. 1 ampere). Parameter for the implementation of new characteristics [present up to software version 3.12]. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.16/88...

  • Page 17: Special Features

    (in the family) the dishwasher inhibits the activation of other wash cycles. Therefore the detergent level in the tank must be restored. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.17/88...

  • Page 18: Dishwasher With Incorporated Continuous Water Softener

    The hardness of the water exiting the softener can vary between 3°fH - 10 °fH / 1.7 °dH - 5.6 °dH / 2.1 °cH - 7 °cH. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.18/88...

  • Page 19: Main Board Configuration

    WT30M240RU 502016 502343 WT38WSG WT30C208DU 502017 502344 WT38MEDWS WT30C240DU 502018 502345 WT38PM50 WT38PM60 502019 502346 WT37LEV/9 WT38M60/4 502020 502347 WT38M50/4 LS6EA 502029 502520 LS6EA/UK LS6EA/DP 502030 502521 LS6EA/UKDP LS6EAH 502031 502523 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.19/88...
  • Page 20 504156 504211 WT65EB WT65EBWS 504157 504212 WT65EI WT65BIDWSG 504158 504213 WT 60 AU DP WT65EBIWS 504159 504214 LS 12 UK/3 CW WT65MEDWS 504161 504215 WT 60 UK CW LS9P 504162 505022 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.20/88...
  • Page 21 690006 LV6EA 698081 LV5DP 690007 LV6EADP 698082 LV5/3WSDP 690008 LS10 INS DP S36220 FL5/3WSDP 690009 LS 10 INS S37858 UC5/1DP 690010 LS 10 S39968 UC5/1WSDP 690011 LS 10/fiera S42549 LD5DP 690013 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.21/88...
  • Page 22 ECOTEMP 12 SW S47CVH LS 12 UK/3 CW S47BJI WT 60 CW INS S47D9Y LS 12 CW S47C1Z WT 60 S47DCA WT 60 CW S47C6B LS 12 CW S47DE0 LS 12 CW S47CCS ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.22/88...
  • Page 23 S47DWC WT 60 S47DWD PPW1 MH S47C37 PPW1 MH S47DE1 WT850 M S43016 PPW2 M S44099 PPW2 M S44399 PPW2 M S45958 PPW2 M S47BW4 WT850 M S47CFG PPW2 M S47CZ1 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.23/88...

  • Page 24: Programming Sheets

    Regeneration cycle disabled. Alarms enabled. Switch OFF and then switch ON the machine. Modify Factory parameters: Factory parameters family bt° C Boiler Temperature Threshold. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.24/88...
  • Page 25 C Boiler Temperature Threshold. Modify Cycle parameters: Cycle 1 Short Wash Phase [s] Cycle 2 Long Wash Phase [min] Short Wash Phase [s] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.25/88...
  • Page 26 Alarms enabled. Switch OFF and then switch ON the machine. Modify Factory parameters: Factory parameters family bt° C Boiler Temperature Threshold. Boiler Temperature Adjust. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.26/88...
  • Page 27 Modify the other parameters: Cycle 1 Final Pause [s] Cycle 2 Final Pause [s] Cycle 3 Final Pause [s] Dishwashing parameters family. Initial Pause Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.27/88...
  • Page 28 Regeneration cycle disabled. Alarms enabled. Switch OFF and then switch ON the machine. Modify Factory parameters: Factory parameters family bt° C Boiler Temperature Threshold. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.28/88...
  • Page 29 Enter into Cycle 3 parameters family. Rinse Phase Duration [s] Drain [s] Select Fahrenheit : Enter into Dishwashing parameter family. Select Fahrenheit degrees. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.29/88...
  • Page 30 Drain [s] Enter into Cycle 2 parameters family. Pre-rinse Duration [s] Drain [s] Enter into Cycle 3 parameters family. Pre-rinse Duration [s] Drain [s] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.30/88...
  • Page 31 Pre-rinse Duration [s] Drain [s] Enter into Cycle 2 parameters family. Long Wash Phase [min] Short Wash Phase [s] Pre-rinse Duration [s] Drain [s] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.31/88...
  • Page 32 Alarms enabled. Switch OFF and then switch ON the machine. Modify Factory parameters: Factory parameters family bt° C Boiler Temperature Threshold. Boiler Priority Disabled Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.32/88...
  • Page 33 Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.33/88...
  • Page 34 Enable filling tank by means of rinsing cycles. Detergent level switches not enabled. Select user interface hood type model (up to version 3.11 set to Regeneration cycle disabled. Alarms enabled. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.34/88...
  • Page 35 Modify Detergent dosage: Enter into GEn parameter family. Initial Detergent Dosage [s]. Initial Rinse Aid Dosage [s]. Counters Number of cycles allowed before regeneration. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.35/88...
  • Page 36 Switch OFF and then switch ON the machine. Modify Factory parameters: Enter into FAC parameter family and change boiler threshold. bt° C Boiler Temperature Threshold. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.36/88...
  • Page 37 Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause at End of Cycle Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.37/88...
  • Page 38 Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.38/88...
  • Page 39 SERVICE MANUAL Electrolux Professional WT30 USPH Prog. 015 Drain parameters family. Initial Drain Phase Duration [s] Set other parameters. Initial Pause [s] Fahrenheit. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.39/88...
  • Page 40 Rinse Phase Duration [s] Drain [s] Final Pause [s] Drain parameters family. Initial Drain Phase Duration [s] Set other parameters. Initial Pause [s] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.40/88...
  • Page 41 Long Wash Phase [min] Short Wash Phase [s] Final Pause [s] Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Final Pause [s] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.41/88...
  • Page 42 Modify the cycle parameters: Cycle 2 parameters family. Short Wash Phase [s] Cycle 3 parameters family. Long Wash Phase [min] Set other parameters. Initial Pause [s] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.42/88...
  • Page 43 Boiler Temperature Adjust. Booster Function. Modify the cycle parameters: Cycle 2 parameters family. Short Wash Phase [s] Cycle 3 parameters family. Long Wash Phase [min] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.43/88...

  • Page 44: B_T

    Initial Rinse Aid Dosage. dEt 182 Detergent dispenser works when LOAD SOLENOID VALVE in activated. Rinse Aid dispenser works when LOAD SOLENOID VALVE in activated. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.44/88...
  • Page 45 Initial Rinse Aid Dosage. dEt 182 Detergent dispenser works when LOAD SOLENOID VALVE in activated. Rinse Aid dispenser works when LOAD SOLENOID VALVE in activated. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.45/88...
  • Page 46 Hood Type like working cycles. Atmospheric boiler. Front loading door type. Default values for Undercounter models. SOFT START ENABLED. Tank heater works only if boiler temperature reached. Enable filling tank by means of rinsing cycles. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.46/88...

  • Page 47: Ln3 Sh3

    Modify Detergent dosage: Enter into GEn parameter family. Initial Detergent Dosage [s]. Initial Rinse Aid Dosage [s]. Counters Number of cycles allowed before regeneration. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.47/88...
  • Page 48 Switch OFF and then switch ON the machine. Modify Factory parameters: Enter into FAC parameter family. bt° C Boiler Temperature Threshold. Boiler Temperature Adjust. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.48/88...
  • Page 49 Drain [s] Drain parameters family. Initial Drain Phase Duration [s] Set other parameters. Drain Phase Duration at the end of washing phase. [s] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.49/88...
  • Page 50 Short Wash Phase [s] Final Pause [s] Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Final Pause [s] Set other parameters. Fahrenheit. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.50/88...
  • Page 51 Cycle 2 parameters family. Short Wash Phase [s] Final Pause [s] Cycle 3 parameters family. Short Wash Phase [s] Final Pause [s] Set other parameters. Fahrenheit. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.51/88...
  • Page 52 Enable filling tank by means of rinsing cycles. Detergent level switches not enabled. ACTIVE function disabled (up to version 3.11 set to Regeneration cycle disabled. Alarms enabled. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.52/88...
  • Page 53 Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause at End of Cycle Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.53/88...
  • Page 54 Short Wash Phase [s] Final Pause [s] Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Final Pause [s] Set other parameters. Fahrenheit. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.54/88...

  • Page 55: B_T

    Final Pause at End of Cycle [s]. Cycle 2 parameters family. Long Wash Phase [min] Short Wash Phase [s] Pause [s] Rinse Phase Duration [s] Drain [s] Final Pause at End of Cycle[s]. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.55/88...
  • Page 56 Enable filling tank by means of rinsing cycles. Detergent level switches enabled. Select user interface hood type model (up to version 3.11 set to Regeneration cycle disabled. Alarms enabled. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.56/88...
  • Page 57 Final Pause at End of Cycle [s]. Cycle 2 parameters family. Long Wash Phase [min] Short Wash Phase [s] Pause [s] Rinse Phase Duration [s] Drain [s] Final Pause at End of Cycle[s]. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.57/88...
  • Page 58 Disable boiler high Temperature alarm ( Boiler Temperature Adjust. Booster function not needed. During stand-by boiler is kept at lower temperature than Temperature Threshold. tt° C Tub Temperature Threshold. Tank high Temperature limit. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.58/88...

  • Page 59: Ln1

    Rinse Phase Duration [s] Drain [s] Final Pause at End of Cycle [s]. Set other parameters. Duration of pause after the rinse cycle [s]. Fahrenheit. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.59/88...

  • Page 60: Ln3

    Initial Rinse Aid Dosage. dEt 182 Detergent dispenser works when LOAD SOLENOID VALVE in activated. Rinse Aid dispenser works when LOAD SOLENOID VALVE in activated. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.60/88...

  • Page 61: Fp3

    Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Final Pause at End of Cycle [s]. Set other parameters. Fahrenheit. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.61/88...
  • Page 62 Short Wash Phase [s] Final Pause [s] Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Final Pause [s] Set other parameters. Fahrenheit. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.62/88...
  • Page 63 Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] Cycle 3 parameters family. Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.63/88...
  • Page 64 Modify the cycle parameters: Cycle 2 parameters family. Long Wash Phase [min] Short Wash Phase [s] Cycle 3 parameters family. Long Wash Phase [min] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.64/88...
  • Page 65 Modify the cycle parameters: Cycle 2 parameters family. Long Wash Phase [min] Short Wash Phase [s] Cycle 3 parameters family. Long Wash Phase [min] Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.65/88...
  • Page 66 Select user interface hood type model (up to version 3.11 set to Regeneration cycle disabled (only for dishwashers with non-continuous water softener). Alarms enabled. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.66/88...
  • Page 67 Initial Pause [s] Modify Communication and HACCP parameters: Enter into parameter family and set the following parameters. Dishwasher with incorporated continuous water softener. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.67/88...
  • Page 68 Detergent level switches not enabled. ACTIVE function disabled (up to version 3.11 set to Regeneration cycle disabled (only for dishwashers with non-continuous water softener). Alarms enabled. 3. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.68/88...
  • Page 69 Final Pause at End of Cycle 6. Modify Communication and HACCP parameters: Enter into parameter family and set the following parameters. Dishwasher with incorporated continuous water softener. 7. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.69/88...
  • Page 70 Switch OFF and then switch ON the machine. Modify Factory parameters: Enter into FAC parameter family and change boiler threshold. bt° C Boiler Temperature Threshold. Boiler Temperature Adjust. Booster Function. Modify the cycle parameters: ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.70/88...
  • Page 71 Alarms enabled. 3. Modify Communication and HACCP parameters: Enter into parameter family and set the following parameters. Dishwasher with incorporated continuous water softener. 4. Switch OFF and then switch ON the machine. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.71/88...

  • Page 72: Default Values

    = 10 BtF= 75 Ith= 100 BSt= 2 FP1= FP2= 0 FP3= CDE= LES= Btd= Bt3= UI = tt° C = 63 rE = ttH= ALr= tHi= 75 AAG= tLo= tFL= 20 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.72/88...
  • Page 73 Dr1= 20 Dr2= 20 Dr3= 20 PPL= 0 Ith= 100 BSt= FP1= 0 FP2= 0 FP3= CdE= LES= Btd= Bt3= UI = tt° C = 63 rE = ttH= ALr= tHi= 75 AAG= tLo= tFL= 40 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.73/88...
  • Page 74 Dr1= 30 Dr2= 30 Dr3= 30 PPL= 0 Ith= 100 BSt= FP1= 0 FP2= 0 FP3= CdE= LES= Btd= Bt3= UI = tt° C = 63 rE = ttH= ALr= tHi= 75 AAG= tLo= tFL= 20 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.74/88...

  • Page 75: User Interface And Main Board Connectors

    Safety and upper/lower limit switch input CN10 Gear unit current control input - Gear unit polarity inversion/connection CN11 User interface inputs/outputs CN12 Overflow/tank level/board feed input CN15 User interface inputs/outputs and hood/door sensor input CN16 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.75/88...
  • Page 76 ECOTEMP transformer and detergent/rinse aid dispenser outputs Tank/boiler temperature sensor inputs Energy peak controller input User interface inputs/outputs CN12 Overflow/tank level/board feed input CN15 User interface inputs/outputs and hood/door sensor input CN16 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.76/88...
  • Page 77 Hand safety system input - Gear motor current control input - Gear motor polarity inversion connection CN11 User interface inputs/outputs CN12 Overflow/tank level/board feed input CN15 User interface inputs/outputs and hood/door sensor input CN16 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.77/88...
  • Page 78 Tank/boiler temperature sensor inputs Energy peak controller input Water feed solenoid valve output CN11 User interface inputs/outputs CN12 Overflow/tank level/board feed input CN15 User interface inputs/outputs and hood/door sensor input CN16 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.78/88...
  • Page 79 Salt receptacle drain pump and low pressure solenoid valve outputs Brine solenoid valve output CN11 User interface inputs/outputs CN12 Overflow/tank level/board feed input CN15 User interface inputs/outputs and hood/door sensor input CN16 Door microswitch connection CN17 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.79/88...
  • Page 80 Salt receptacle drain pump and low pressure solenoid valve outputs Door lock electromagnet and brine solenoid valve output CN11 User interface inputs/outputs CN12 Overflow/tank level/board feed input CN15 User interface inputs/outputs and hood/door sensor input CN16 Door microswitch connector CN17 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.80/88...
  • Page 81 ECOTEMP transformer and detergent/rinse aid dispenser outputs Tank/boiler temperature sensor inputs Energy peak controller input Hood lock electromagnet output CN11 User interface inputs/outputs CN12 Overflow/tank level/board feed input CN15 User interface inputs/outputs and hood/door sensor input CN16 ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.81/88...

  • Page 82: Alarm Messages And Troubleshooting

    Are the air trap and tank pressure switch clean? Does the tank pressure switch work properly? Is the load solenoid valve blocked? (E1 - LOAD_EV) Is the load solenoid valve relay stuck? (RL8 - LOAD_EV) ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.82/88...
  • Page 83 THE INTERNAL PARTS OF THE DISHWASHER. CAUTION: C8 IT MUST BE MANUALLY RESET AFTER ELIMINATING THE CAUSE OF THE MALFUNCTION. Automatic hood out of order See par. C1 - Alarm codes for automatic hood type dishwashers ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.83/88...
  • Page 84 Appears if during lifting S3’’ does not return to the rest AL_3 t 1. position within a time AL_4 Appears if the bottom limit switch (FC_DW) cuts in during lifting. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.84/88...
  • Page 85 If this does not occur the alarm appears. - One of the two relays (K or K’) could be stuck or disconnected. (See parameter ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.85/88...
  • Page 86 The hood should be stopped but the card detects a high current absorption by the lifting AL_23 motor: AL_24 the relay RL18/RL19 could be stuck; feeder connector CN32 could AL_25 disconnected. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.86/88...
  • Page 87 CAUTION: WHEN ONE BRANCH OF THE HEATING ELEMENT DOES NOT WORK AND THE OTHER TWO CONTINUE TO FUNCTION, ON REACHING THE SET TEMPERATURE VALUE, ALARM 3 DISAPPEARS AND REAPPEARS IN THE SUBSEQUENT RINSE PHASE. THIS ALSO OCCURS WHEN A PHASE IS MISSING. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.87/88...
  • Page 88 50 kPa / 0.5 bar − the water inlet filter is clean − the filling solenoid valve filter is clean − the mother board (ATM-PRES) connector CN2 is correctly positioned. ©Copyright 2005 by Electrolux Professional DOC. NO. 5956.446.06 P.88/88...

This manual is also suitable for:

Edw7505hss - semi-integrated dishwasher with 5 wash cyclesEdw7505hps - semi-integrated dishwasher with 5 wash cycles

Table of Contents