Remote Wake Up - NEC Express5800 series User Manual

84 Web Component

REMOTE WAKE UP

The Remote Wake Up function allows you to power on systems on the network.
To use the Remote Wake Up function, follow the instructions below.
Select the check box of the host or a map containing the host you want to start on the
1.
Operation Window, and select the Remote Wake Up menu.
Select the hosts you want to start from the Target Host(s) List, and click [Execute].
2.
NOTE:
To use the Remote Wake Up function, the "RWU MAC Address" and
"RWU IP Broadcast Address" must be set.
The Remote Wake Up function needs to be enabled on the target host to
use this function. See the manual for each component for how to set it
up.
Additionally, the direct broadcast needs to be enabled in a router to use
this function over the network via the router. See the router manual for
details.