Automatic Network Setup
If you connect a LAN cable in a location that supports DHCP, the Internet Protocol (IP) Settings are automatically
configured.
Please check if a LAN cable is connected first.
➣
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
2.
Press the ▲ or ▼ button to select "Network Setup", then press the ENTER
button.
3.
Press the ENTER
4.
Press the ▲ or ▼ button to select "Auto Setup", then press the ENTER
button.
The Internet Protocol is set automatically.
➣
Select "Network Test" to check the network connectivity.
➣
(Refer to page 86)
Press the EXIT button to exit.
BN68-01429C-Eng.indb 83
button to select "Internet Protocol Setup".
English - 8
Language
button.
Time
Network Setup
V-Chip
Caption
External Settings
Entertainment
Energy Saving
PIP
SW Upgrade
Network Setup
Internet Protocol Setup : Auto Setup
Auto Setup
Network Test
Manual Setup
Move
: English
►
: Off
: Off
Enter
Return
2008-02-26 ¿ÀÈÄ 5:14:38