At^sstgi Sat Get Information - Siemens MC55 Command Set

MC55 AT Command Set
14.3 AT^SSTGI
14.3

AT^SSTGI SAT Get Information

Regularly this command is used upon receipt of an URC "
Command.
Then the TA is expected to acknowledge the
Command has been executed.
The Proactive Command type value specifies to which "
Syntax
Test Command
AT^SSTGI=?
Response(s)
^SSTGI: (list of supported
OK
Read Command
AT^SSTGI?
Response(s)
,
^SSTGI: <state> <cmdType>
OK
Write Command
AT^SSTGI=<cmdType>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
SIEMENS
Parameter Description
(num)
<state>
MC55 Remote-SAT interface states
0
1
2
3
4
MC55_ATC_V01.05
Confidential / Released
AT^SSTGI
will also provide any user information, e.g. a selected menu item.
AT^SSTR
s), (list of supported
<state>
MUX2 MUX3
% % %
RESET
OFF
IDLE
PAC
WAIT
Page 366 of 469
" to request the parameters of the Proactive
^SSTN
response with
AT^SSTR
" the command is related.
^SSTN
s)
<cmdType>
s
m
obile
to confirm that the Proactive
2/10/04