Toshiba e-STUDIO453 Service Manual page 180

(A-5) Bypass paper sensor
(1) Take off the bypass unit (
(2) Take off the bypass feed upper cover
( Chapter 9.4 (A-4)).
(3) Take off the upper plate (
(4) Take off the spring and sensor arm.
(5) Disconnect the connector from the sensor
and release the latch to take off the bypass
paper sensor.
9
(A-6) Bypass pickup roller
(1) Take off the bypass unit (
(2) Remove 1 screw and take off the bypass
feed upper cover .
(3) Remove 4 screws and take off the bypass
drive unit.
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
Chapter 9.4 (A-1)).
Chapter 9.4 (A-4)).
Chapter 9.4 (A-1)).
Screw
9 - 14 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Sensor arm
Spring
Fig. 9-417
Bypass paper
sensor
Fig. 9-418
Screw
Bypass feed upper cover
Fig. 9-419
Bypass drive unit
Fig. 9-420
Screw