Changing Pits Programming - Panasonic KX-T336 System Reference Manual

6.00 Changing PITS
Programming Password
The following operation is used to change the PITS
programming password which is required to enter
into PITS system programming mode.
Operation
1. Set PITS system program-
ming mode.
Result
Comment/Note
* The message appears on the . Refer to Section 11 -C-l .OO
display: Setting PITS System
Programming Mode."
SYS-PGM No? +
l
The MEMORY button indicator
lights in red.
2. Dial "0 4." (program number)
l
Current password appears on
l
The MEMORY button indicator
light goes out.
3. Dial new password: four
digits.
l
Dialed password appears on
l
Values from 0 to 9, *, # can be
the display.
entered. . .
<Example>
System PW: 5555
I
4. Press the MEMORY button
: .lIe MEMORY button indicator
to store the entry.
lights in red.
l
Confirmation tone sounds.
11-c-14