While Having A Conversation; Call On Hold - Co; Call Park Retrieve - Panasonic EASA-PHONE KX-T30810 Installation Manual

To place a call on hold:
To retrieve:
at the holding extension
PRESS
"HOLD"
CONFIRMATION
TONEOF
BEEPSWILL
BEHEARD
PRESS"C0"
from another extension
I I
I
,
PRESS"C0"
If
you wish to leave your phone unattended but
want the caller you are in conversation with to
wait, call hold may be used. Outside calls may
be placed on hold.
Calls on hold can be released by another
extensions.
. You are in conversation with an outside
party.
I
2. Press the HOLD button.
The indicator of CO button which is on hold
will flash slowly (green color).
The confirmation tone of 2 beeps will be
heard.
To Retrieve at the holding extension,
press the CO button (flashing green).
The indicator light will return to a steady
green.
To trieve from another extension,
press the CO button (j?ashing red).
or
dial (5) and then the extension number of
the phone on which the call was placed
on hold.
[51 [A/31
l-AB=ll
through 18
The green flashing indicator at the held
extension will turn red.
Refer to "Call Park Retrieve" on page 3-11.
call is on hold for more than 30
mmutes after a hold time reminder is sounded
the call will be terminated automatically.
A hold time reminder is sounded through the
built-in speaker of the extension.
Calls on hold will be recalled either after
30 seconds,
I minute, 1 minute and
30 seconds or 2 minutes, once handset is
laced (or the SP-PHONE button is
ssed) .
If hold recall time set is set to "DISABLE",
will not be recalled.
Refer to "Hold Recall Time Set" on page 2-34.
The hold time reminder is activated, even if the
hold recall time set is programmed to "DIS-
ABLE".
When lifting the handset
{or
be pressing the
SP-PHONE button):
before recalling... The dial tone will be heard
with the call on hold.
You may dial another
phone number.
while recalling. . . Only the first call on hold
will be released and entered
into the conversation mode.
3-13