Table of Contents
Advertisement
16
Getting Started with Your gigabeat®
Charging the built-in battery/Connecting your computer and the
NOTE
1
Insert the CD-ROM that came with your gigabeat
computer.
The CD-ROM will be automatically recognized and the
installation menu for application software will appear. If this
menu is not displayed, double-click Launcher.exe on the CD-
ROM using Explorer.
2
Click the Install Windows Media Player 10/11 button.
3
Follow the on-screen instructions.
Depending on the OS of your computer, Windows Media
Player 11 or Windows Media
your computer is installed with Windows
or later, or Media Center Edition 2005 Rollup 2 or later,
Windows Media
Windows
version, Windows Media
To close the installation menu, click the Close button.
Charging the built-in battery/Connecting your computer and
®
the gigabeat
To charge the battery, connect your gigabeat
the USB cable. Also use the USB cable to transfer audio files or
other media files to gigabeat
Charge the built-in battery sufficiently before using your gigabeat
for the first time, or when the gigabeat
of non-operation.
Charging times vary depending on factors such as status of the
internal battery, ambient temperature, and performance of your
computer's USB bus power supply.
NOTE
So that your gigabeat
properly, be sure to install Windows Media
on your computer before connecting the gigabeat
computer.
It is recommended that you run Windows
computer after installing the software, to check for new module
updates.
®
Player 11 will be installed. If your
®
XP Service Pack or Media Center is an earlier
Be sure to install Windows Media
computer first, or your gigabeat
with your computer properly.
®
can communicate with your computer
®
Player 10 will be installed. (If
®
Player 10 will be installed.)
®
®
from a computer.
®
is used after a long period
®
Player 11 or 10 on your
®
will not be able to communicate
®
Player 11 or 10
®
to your
®
Updates on your
®
into your
®
®
XP Service Pack 2
to the computer with
®
Advertisement
Table of Contents
