Connections
Connecting with ultrasonic inspecting instrument, video monitor, etc
Ultrasonic inspecting
instrument, etc
Video output
Video output
(S-video connector)
(BNC-type
connector)
Note
•
To monitor the playback picture, connect the video monitor to VIDEO OUT connector.
•
Set the 75ohm termination switch for S-VIDEO IN LOOP THROUGH connector to OFF when the video monitor or another audio
and video device is connected to S-VIDEO IN LOOP THROUGH connector.
Set the 75ohm termination switch for VIDEO IN LOOP THROUGH connector to OFF when the video monitor or another audio and
video device is connected to VIDEO IN LOOP THROUGH connector.
12
Installation
Video input (S-video connector)
Video input
(BNC-type connector)
Audio
input
Audio output
AUDIO
IN
VIDEO S-VIDEO
CH1
75ohm
75ohm
L
OFF ON
OFF ON
CH2
R
AUDIO
OUT
LOOP
THROUGH
CH1
L
IN
CH2
R
OUT
MONITOR
RESET
FOOT
REMOTE
SW
Wired remote control R-3001
(optional)
Video input
(S-video connector)
Video input
(BNC-type connector)
Audio input
Note
A point to notice
Video monitor
Supplementary information
Info.