Siemens SICLOCK TC 400 Operating Instructions Manual page 71

Operating display with pending message
EVENT
event text event text..
Figure 8-4 Example of the display during operation with an error
In the top line, the message type and the date/time are displayed alternately. In
the bottom line, the message text is displayed in scrolled form.
When a message occurs, the backlighting is automatically switched on for 10 min-
utes.
Table 8-2
Display
INFO
WARNING
EVENT
Note
Pending messages can be acknowledged with OK.
If a persistent message that cannot be acknowledged is pending, you can change
to the operating display temporarily with the ESC key.
Backlighting
The display backlighting is switched on for 10 minutes every time a key is pressed
© Siemens AG 2007 All Rights Reserved
®
SICLOCK TC 400
Parameterization and Operation on the Device
´
Possible message types
Current message is an information message
Current message is a warning
Other messages, e.g. an alarm
19/09/2007 10:41:27
event text event text..
Meaning
8-69