Page 1
Register your product and get support at www.philips.com/welcome 42PFL7409D/30 47PFL7409D/30 32PFL5609D/30 42PFL5609D/30 47PFL5609D/30 *non-contractual image User manual...
Contents 7 Connect devices Back connectors Side connectors Connect a computer 1 Notice Assign devices Use Philips EasyLink Use a Kensington lock 2 Important 8 Product information 3 Your product Side controls and indicators Remote control 9 Troubleshooting 4 Use your product...
Philips effects. Philips conÀ rms that if its products are warrants that the material itself does not handled properly for their intended use, they infringe any United States patents.
TV from the power the weight of the TV. Secure the wall outlet immediately. Contact Philips mount to a wall that can support the Consumer Care to have the TV combined weight of the TV and wall checked before use.
the value printed on the back of the TV. Recycling Never connect the TV to the power outlet if the voltage is different. • Risk of injury, À re or power cord damage! Never place the TV or any objects on the Your product is designed and manufactured power cord.
3 Your product Remote control Congratulations on your purchase, and welcome to Philips! To fully beneÀ t from the support that Philips offers; register your product at www.philips.com/welcome. Side controls and indicators POWER : Switches the product on or off. The product is not powered off completely unless it is physically unplugged.
Page 8
b DIGITAL MENU s 0-9 ( Numeric buttons ) Accesses or exits the digital menu. Selects a channel or setting. SOURCE PICTURE ( Smart picture ) Selects connected devices. Launches the picture menu. d SUBTITLE SOUND ( Smart Sound ) Enables or disables subtitles.
4 Use your product Switch channels This section helps you perform basic operations . Switch your TV on/off or to standby • Press BACK A/CH on the remote control to return to the previously viewed channel. • Press CH +/- on the remote control or To switch on P/CH +/- on the side of the TV.
Watch connected devices Adjust TV volume Note • For easy access, add new devices to the home menu before selecting them. Use the source button To increase or decrease volume • Press +/- . Press SOURCE . » • Press VOLUME +/- on the side of the TV. The source list appears.
5 Use your product Install channels in digital mode The À rst time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). Understand the information Check for TV channels or radio banner stations When you select a digital channel, an...
Press to Add new services and press Press OK to store the services. OK to activate the installation. Press to return to the previous menu » A search begins. Any new channels are or press DIGITAL MENU to exit. added to the channel list menu. The percentage of the installation that has Install digital channels manually been completed and the number of...
Set your preferences Press to select [Signal Strength] . » An indicator bar displays the strength level of the TV signal. Set your language Press to return to the previous menu or press DIGITAL MENU to exit. You can select your preferred language for system menu and subtitle.
Set your digital audio output Note • If [Enable Pin Protection] is Off, select On to Note proceed. • If you are not in the digital mode, press Enter the default PIN code “1234” with ANALOG/DIGITAL . the numeric buttons (0-9). You can access the menu now using the Press DIGITAL MENU.
Set up your favourite Add all services to a favourite list channels Press DIGITAL MENU. Select [Favorites] > list number (List 1 to You can create a list of up to four of your List 4) > [Add all services]. and press . favourite TV channels and radio stations.
Press to return to the previous menu or press DIGITAL MENU to exit. Use the Electronic Programme Guide EPG is an on-screen guide available for digital channels. EPG allows you to: • View a list of digital programmes being broadcast •...
6 Use your product • [Setup] Accesses menus to adjust picture, sound and other TV settings. in analogue mode • [Add new device] Adds new devices to the home menu for easy access. Press OK to conÀ rm your choice. Press ( Home ) to exit.
Page 18
Use smart picture • [HD Natural Motion] Reduces À eld and line Á icker to display movement Use smart picture to apply pre-deÀ ned smoothly. You can switch HDNM on picture settings. or off. • [100Hz LCD] Not available in all Press PICTURE.
Summary of picture formats Use smart sound The following picture settings can be Use smart sound to apply pre-deÀ ned sound conÀ gured. settings. Note • Depending on the format of the picture source, some picture settings are not available. Press SOUND .
• [Auto volume] Automatically Add a channel to a favourite list reduces sudden volume changes, for example, when switching channels. When enabled, this produces a more • View all channels before adding a channel to a consistent audio volume. favourite list. •...
Use timers Select [Setup] > [Features] > [On timer] > [Activate] . You can set timers to switch the TV on or Press OK . switch to standby at a speciÀ ed time. Press to set the time and channel. Set the time •...
» A message appears prompting you to Select a subtitle language on digital TV enter your PIN code. channels Enter your PIN code with the Numeric buttons . Note » The [TV lock] menu appears. • When you select a subtitle language on a digital TV channel as described below, Press to select [Lock] or [Unlock] .
À le browsing views. Caution Disconnect a USB storage device • Philips is not responsible if the USB storage device is not supported nor is it responsible Caution for damage or loss of data from the device. •...
Change slide show settings Use Scenea to display a picture as TV wallpaper When viewing a slide show, press OPTIONS . » You can use the Scenea feature to display a still The slide show options menu appears. picture as wallpaper on your TV. This feature is Press to select from the following for home mode only.
USB storage device from the TV. The TV will continue the update as soon Update the TV software as power comes back. Philips continuously tries to improve its Connect the USB storage device to the products and we recommend that you update »...
Change TV preferences Reset the TV to factory settings The [Preferences] menu allows you to customise various features and functions. You can restore the default picture and sound Press ( Home ). settings of your TV. Channel installation settings remain the same. Select [Setup] >...
a TV ANTENNA 7 Connect devices Signal input from an antenna, cable or satellite. b AUDIO IN L/R This section describes how to connect Audio input from devices that require various devices with different connectors and a separate audio connection, such as a supplements examples provided in the Quick computer.
Side connectors Connect a computer Before you connect a computer to the TV • Set the monitor refresh rate on your computer to 60Hz. • Press FORMAT and change the TV picture format to [Unscaled] . Connect a computer with one of the following connectors: Note •...
• HDMI cable and HDMI-DVI adaptor If available, press to select the audio connector your device is connected AUDIO IN: AUDIO IN: LEFT / RIGHT LEFT / RIGHT to and press . HDMI 1 / DVI HDMI 1 / DVI HDMI 2 / DVI HDMI 2 / DVI HDMI 3 / DVI...
Use Philips EasyLink EasyLink buttons You can control EasyLink-compliant devices Your TV supports Philips EasyLink, which with the following buttons on the remote uses the HDMI CEC (Consumer Electronics control of your TV. Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors...
There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington • Do not enable Philips EasyLink if you do not lock between the slot and a permanent object, intend to use it.
TV system: PAL BG, SECAM BG, PAL I, PAL DK, SECAM DK, NTSC M • Video playback: NTSC, PAL, SECAM Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Multimedia Supported display resolutions • Connection: USB •...
Ambient temperature: 5 to 35 degrees Celsius Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 5.5 cm from the back of the TV.
Loudspeakers, unearthed audio devices, cable. If the blinking reoccurs, contact neon lights, high buildings and other large Philips Consumer Care. objects can inÁ uence reception quality. You forgot the code to unlock the child lock If possible, try to improve the reception...
Contact us • Verify that sound balance is set to the centre. If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/ HDMI connection issues support. If the problem remains unresolved, contact There are problems with HDMI devices: Philips Consumer Care in your country as •...
10 Index EasyLink disable enable Environmental care Batteries Factory settings Channel list Favourite list favourite select troubleshooting set up update Channels favourite list install HDMI cable automatic troubleshooting manual Home mode rearrange rename test reception Child lock Installation TV lock automatic Clock manual...
Page 37
Picture settings PIN code Power listen to music upload a picture from view photos Reception Remote control technical speciÀ cations Video format troubleshooting video format technical speciÀ cations Volume adjust Screen saver Settings assistant Sleep timer Wallpaper Smart settings 16 , 17 Sound settings Standby troubleshooting...