!-5. Attach the arm cover (E) to the arm (M).
Insert the eight claws in the arm cover (E) in the
eight holes in the arm (M).
-6. Assemble the cable cover as shown in the figure below.
!
Note:
The cable cover is supplied with the LCD projector.
-7. Attach the cable cover.
!
Engage the three tabs in the cable cover with the three holes in the LCD projector.
Route the cables through the holes
in the top of the cable cover.
HAS-K252
Note:
When the arm (M) will be used in retracted mode,
insert the claws at the four locations shown in the
figure.
20
Ad
•
•
•
•
•
•
No
1.
(b