Automatic Traffic Information Reception - Yamaha RX-V471 Owner's Manual

Front display (when "Program Type" selected)
Frequency
Press ENTER to start the search function.
Status
TUNER
ENTER
RETURN
Program Type
• "PTY Wait," "RT Wait;' or "CT Wait" may appear when 'Program Type," "Radio
Text," or "Clock Time" is displayed. That shows this unit is receiving data (or
stopping receiving data). If the data is receivable, the corresponding information is
displayed after a while.
• "Program Service," "Program Type," "Radio Text" and 'Clock Time" do not appear
when the radio station does not provide the Radio Data System service.
Automatic traffic information reception
When the tuner is active, this unit can automatically search for and
receive transmission from traffic information broadcast stations.
Press TUNER to select "TUNER" as the input
source.
2 Press OPTION.
The transmission search will begin upward from the current
frequency in approximately 5 seconds. Or, when the status
indicator reads "READY," you can begin the search
immediately by pressing ENTER.
• By pressing RETURN right before or during a search, it will return to the
"Option" menu.
• When the status is "READY," use the cursor keys (A/V) to start a search in
the specified direction. If no operation is performed for more than 5 seconds,
a search automatically starts upward.
- Cursor key (A): Searches upward from the current frequency.
- Cursor key (V): Searches downward from the current frequency.
When a traffic station is found, it will appear on the display and
the "Option" menu will close.
Press the cursor keys (/\Iv) to select
"TrafficProgram."
Traffic information broadcast station (Frequency)
• If the receiver cannot find a traffic station, "TP Not Found" will appear on the
display, and the "Option" menu will shortly close.
En
41