Table of Contents
Advertisement
Chapter
3
Using
the
TV's
Features
ChannelBanner
There are several indicators that might appear when you
press the 1V or INEO buttons on the remote. This display is
called the Channel Banner. The following
list describes the
items on the Channel Banner screen (left to right and top to
bottom).
12:01
i
[]
ESPN
6O
SAP
Displays the current time.
The lock is displayed to indicate when Parental
Controls are locked or unlocked.
Displayed when Closed Captioning
is available
on the current channel.
Displays the label assigned to the current
channel.
Displays the current channel or input channel
(ERNT).
Mute is displayed when you mute the audio.
Stereo is displayed when the current channel is
broadcasting
in Stereo.
Displayed when the current channel is
broadcasting
SAP (Second Audio Program)
information.
Displayed when the Sleep Timer has been set.
Why
You Should
Use the Auto
Tuning
Feature
Note: Youmust hove e universol remote to use this lecture. Topurchoseo universolremote, visit too.com.
The auto tuning feature automatically
tunes the lV to the correct channel for different
components
you
have connected
to your ]V/DVD (like a VCR, satellite receiver, etc.) When you set up auto tuning in the
menu system you don't have to remember to change your lV to channel 3, for example, when you want
to watch the tape in your VCR.
How
to Set
Up
the
Auto
Tuning
Feature
The way you set up the auto tuning feature in the ]V's menu corresponds to the component
buttons on
the remote and the way you have each component
connected
to your lV/DVD. When you are in ]V mode
and set auto tuning, you're telling
it what channel to tune to when you press the VCR1, VCR2, or
SAToCABLE button
on the remote control.
1. PressMENU (the MAIN MENUappears).
2. Highlight Chonnel and pressOK on your remote controk
3. Highlight Auto Tuning and pressOK.
28
Graphics contained
within this publication
ore for representation
only.
Chapter
3
Advertisement
Table of Contents
Troubleshooting
