Answering A Call; Managing Calls - Nokia 9000i communicator User Manual

Chapter 4 - Telephone

Answering a call

When you receive a call while having the com-
municator cover open, a note about the incom-
ing call is shown on the screen. If you are called
by a person who has a contact card (as in figure
4-2), the caller is identified by his/her name (if
supported by the network).
To answer the call:
Close the device cover and answer the call via
the phone interface (by pressing

Managing calls

When you have made a call, information about
the call(s) is shown on the display within a frame
(see figure 4-2). In addition to the active call, you
can have a held call and a waiting call at the
same time. The conference call, which can con-
tain up to five remote participants, is handled as
a single call.
To switch between multiple calls, use the scroll
or arrow keys. The command buttons change ac-
cording to the selected call's status. For example
Or, alternatively,
When you receive the incoming call note,
press Answer.
Note: You cannot have two active calls at the
same time: the previous active call is au-
tomatically put on hold when you answer
a waiting call (the network service Call
waiting must be activated).
).
If you do not want to take the voice call, press
End call. The caller will hear the alerting tone
change to a "line busy" tone.
the held call can be changed into an active call
by pressing Activate.
Call information may include the following:
• The name or phone number of the caller (if
available).
• Call status shows whether the current call is
active, on hold, or waiting, and whether the
audio is off.
Figure 4-2
1998 Nokia Mobile Phones. All Rights Reserved.
4-3