Handle Assembly - Kenmore 1163511290 Owner's Manual

EEEEEE SSEMBL Y
HANDLEASSEMBLY
Before assembling your vacuum cleaner be sure you
have all the parts shown,
Electrical Shock Hazard
i
Do not plug into the electrical supply until the
assembly is complete_ Failure to do so could
resultin electrical shock or injury.
]
,Cord Hooks
Screw Hole
Opening for Handle
Carry Handle
IIII H_,o
Screw Hole
Back of
Vacuum Cleaner
Carry Handle
Screw
\
Remove the screw located just below the carry
handle on the back side of the vacuum,
Position the handle so the cord hooks are toward the
back of the cleaner.
Insert the handle into _ /
the opening at the
top of the vacuum.
Align the screw hole
in the handle with the CordHooks
screw hole in the
vacuum.
Insert the screw so it
passes through the
back of the vacuum
into the handle.
Begin to tighten the
screw with your
fingers, It may be
necessary to adjust Handle
_ Carry Handle