Advertisement
No Load Speed
19,000 RPM
Input
120 volts, 60 Hz, AC
Amperes
3.5
Depth Of Cut
With Micro Depth Of Cut Adjustment
0 - 9/32 in.
Fence Angles
Fence Height Adjustment
With Fence Angle Set On 90 °
With Fence Set On 45 °
Net Weight
45 ° and 90 °
0 - 3/4 in.
5/16 in. - 13/16 in.
3.625 Ibs.
Your Biscuit Joiner has been shipped completely
assembled and ready for use. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate Biscuit
Joiner.
DOUBLE
INSULATION
Double insulation is a concept in safety, in electric
power tools, which eliminates the need for the usual
three-wire grounded power cord. All exposed metal
parts are isolated from internal metal motor
components with protecting insulation. Double
insulated tools do not need to be grounded.
_k
WARNING:
If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
IMPORTANT
Servicing of a toot with double insulation requires
extreme care and knowledge of the system and
should be performed only by a qualified service
technician. For service we suggest you return the toot
to your nearest Sears Store for repair. Always use
original factory replacement parts when servicing.
,_
Look
for
this
symbol
to point
out important
safety
precautions.
It means
attention!!!
Your safety
is involved.
WARNING:
The operation of any Biscuit Joiner can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields, available at Sears Retail Stores. Always wear eye protection which is marked to
comply with ANSI Z87.1.
7
Advertisement
