Advertisement
Quick Links
Operator's
Manual
I
P R
0
F
E S
S I
0
N
A
L I
28cc/1.7 cu.in. 2-Cycle
GASOLINE
WEEDWACKER
®
Model No.
358.792010
•
Safety
•
Assembly
•
Operation
•
Maintenance
•
Parts List
•
Espa_ol,
p. 20
WARNING:
Read and follow all Safety
Rules and Operating
Instructions
before first use of this product.
For answers
to your questions
about this product:
Call 7 am-7
pm, Mon.-Sat.,
or 10 am-7
pm, Sun.
1-800-235-5878
<Hoots listed are Central Time)
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179 U.S.A.
545212843
Rev. 4
2/16/09
BRW
Advertisement
Related Manuals for Craftsman WEEDWACKER 358.792010
Summary of Contents for Craftsman WEEDWACKER 358.792010
- Page 1 Operator's Manual 28cc/1.7 cu.in. 2-Cycle GASOLINE WEEDWACKER ® Model No. 358.792010 • Safety • Assembly • Operation • Maintenance • Parts List • Espa_ol, p. 20 WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. For answers to your questions about this product:...
- Page 2 (3) years from the date of purchase, return it to any Sears store, Parts & Repair Ser- vice Center, or other Craftsman outlet in the United States for free repair (or replace- ment if repair proves impossible). This warranty applies for only 1 year if this product is ever used for commercial rental purposes.
- Page 3 Sears I nstallation Service For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. or Canada call 1-800-4-MY-HOME®. ,_DANGER: Use only specified trimmer head, spool, and recommended trimmer line. Never use blades, flailing devices, wire, rope, string, etc.
- Page 4 Never allow children to operate this unit. Store unit indoors in a high, dry place out of the reach of children. Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.
- Page 5 A hot muf- fler can cause serious burns. • Use only Craftsman replacement line. Never use wire, rope, string, etc. • Cut only from your right to your left. • Install required shield properly before Cutting on left side of the shield will using the unit.
- Page 6 TRANSPORTING AND STORAGE offeeling inthe fingers, hands, or • Stop t he unit b efore carrying. joints, discontinue the use ofthis tool and seek m edical attention. Ananti- • Allow engine tocool before storing ortransporting invehicle. vibration system d oes n ot g uarantee the avoidance ofthese p roblems.
- Page 7 1. Remove wing nut f rom shield. Wing Nut 2. Insert bracket into slot a sshown. Bracket Pivot shield until bolt passes through hole in bracket. Slot Securely tighten wing nut onto bolt. KNOW YOUR TRIMMER READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.
- Page 8 2-cycle air-cooled engine oil. W e recommend Craftsman brand synthetic oil. M ix gasoline and oil ataratio o f40:1. A40:1 ratio i sob- tained bymixing 3.2 ounces ofoil w ith 1 gallon ofunleaded gasoline. Included with this trimmer isa3.2 ounce contain-...
- Page 9 7. Once t he engine starts, allow itto eyes and face and cause blindness or run 10seconds, then move t he other serious injury. choke l ever tothe OFF C HOKE When operating unit, stand as shown position and begin n ormal opera- and check for the following: tion.
- Page 10 • During light d uty cutting. MOWING - Your trimmer is ideal for • Near objects around which t heline mowing in places conventional lawn can wrap such assmall posts, mowers cannot reach. In the mowing trees o rfence w ire. position, keep the line parallel to the TRIMMING - Hold t hebottom o fthe...
- Page 11 GENERAL RECOMMENDATIONS NOTE: To avoid creating a fire hazard or producing harmful evaporative The warranty on this unit does not cover items that have been subjected emissions, do not clean filter in gaso- line or other flammable solvent. to operator abuse or negligence.
- Page 12 LINE REPLACEMENT IN FIXED Repeat step 5 for second line. LINE TRIMMER HEAD • Always use Craftsman replacement line. Choose the line size best suited for the job at hand. Red line (#71-85908) is designed for cutting grass and small weeds.
- Page 13 If cutting line retreats into trimmer Arrow on Tap Button head during use: 1. Remove cover from trimmer head by pressing tab and turning cover clockwise (looking from bottom of unit). Bend the line at the midpoint and insert both ends of the line through the holes in the center of the tap button.
- Page 14 REPLACING THE TRIMMER HEAD • The trimmer head moves or spins at idle. 1. Align hole in the dust cup with the hole in the side of the gearbox Make adjustments with the unit sup- rotating the arbor shaft. ported so the cutting attachment is off Insert a small screwdriver into...
- Page 15 Run engine atleast 3min- aged, broken, orworn p arts. utes a fter a dding stabilizer. • Atthe beginning ofthenext season, Craftsman 40:1,2-cycle engine oil(air use only f resh f uel h aving the proper cooled) isalready blended with fuel gasoline tooil r atio.
- Page 16 YOUR WARRANTY RIGHTS AND OB- your nearest authorized service center, LIGATIONS: The U.S. Environmental call Sears at 1-800-469-4663, or send Protection Agency/California Air Re- e-mail correspondence to emission. sources Board and Sears, Roebuck warranty@ HCOP- emission.com. WARRANTY COMMENCEMENT and Co., U.S.A., are pleased to explain the emissions control system warranty DATE: The warranty period begins on on your year 2009 and later small off-...
- Page 17 WHERE TO GET WARRANTY SER- EMISSION CONTROL WARRANTY VICE: Warranty services orrepairs shall PARTS LIST: Carburetor, air filter (cov- beprovided atallSears Service Cen- ered up to maintenance schedule), ters. Call 1-800-469-4663 orsend ignition system: spark plug (covered e-mail correspondence toemission. up to maintenance schedule), ignition warranty@ HCOP- emission.com.