Figure 20 Single rack configuration floor space requirements
.
1. Front door
3. Rack width 600 mm
5. Rear service area depth 300 mm
7. Front service area depth 406 mm
If the feet are not fully raised, complete the following procedure:
1.
Raise one foot by turning the leveler foot hex nut counterclockwise until the weight of the rack is
fully on the caster (see
2.
Repeat
Step 1
for the other feet.
Figure 21 Raising a leveler foot
.
1. Hex nut
3.
Carefully move the rack to the installation area and position it to provide the necessary service
areas (see
Figure
20).
Figure
21).
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
2. Rear door
4. Service area width 813 mm
6. Rack depth 1000 mm
8. Total rack depth 1706 mm
2. Leveler foot
35