Craftsman 71.74295 Operator's Manual page 8

Figure 6
2.Insert themale end ofthepower
handle i nterface into thefemale
socket intheend oftheextension pole
making s ure thatitisfirmly seated.
(see figure 7)Theinterface iskeyed
sothatitwill o nly gotogether one
way. The handle a nd pole should g o
together easily. Ifyouexperience
resistance inputting t hem together,
check t hat t hekeys onthehandle a re
properly aligned w iththeslots inthe
pole.
Figure 8
To attach the saw head to the pole:
1. Twist the lock ring on the pole to the
unlocked position. (see figure 9)
Figure 7
3. Grasp the pote firmly with one hand
and twist the lock ring on the power
handle to the locked position with the
other hand.(see figure 8)
Figure 9
2. Insert the male end of the pole
interface into the female socket in
the end of the saw head making sure
that it is firmly seated. The interface is
keyed so that it will only go together
one way. The pole and saw head
should go together easily. If you
experience resistance in putting them
together, check that the keys on the
pole are properly aligned with the slots
in the saw head.
3. Grasp the saw head firmly with one
hand and twist the lock ring on the pole
to the locked position with the other
hand. (see figure 10)