Displaying The Hoop; Viewing And Hiding The Hoop; Selecting A Hoop - Brother BES Monogramming Suite Instruction Manual

Displaying the Hoop

Viewing the hoop or frame on the screen lets you ensure that
your design fits properly when you run it on the machine. The
hoop serves as a guide to help size and position your design in
the design window. Pacesetter BES Monogramming Suite
comes with many pre-loaded hoop sizes.

Viewing and Hiding the Hoop

Use the Hoop tool to show and hide the hoop in the display
window. Just click on the Hoop tool to show the hoop (if it is not
currently shown) and click it again to hide the hoop.
The hoop's dimensions are determined by your settings under
the Hoops dialog in Pacesetter BES Monogramming Suite.
Using the Hoop tool may effect the magnification level of your
design. For example, if you are zoomed in on the design,
clicking the Hoop tool will cause the view to zoom out enough to
fit the entire hoop into the workspace.

Selecting a Hoop

You can select one of the pre-loaded hoops using the Hoops
dialog. You will notice that you can select hoops from different
file types in this dialog. This is useful when you want to make
sure that your design will fit for more than one kind of
embroidery machine.
To select a hoop using the Hoops dialog:
1 On the Home Tab, click the down arrow under the Hoop tool.
2 From the menu that appears, click on Select Hoop.
You see the Hoops dialog.
Learning about the Workspace 27