Panasonic Viera TC-P42X3 Owner's Manual page 55

Why is there no sound coming
from the TV?
Why is the sound unusual,
distorted, low volume or in
another language?
Make sure the volume is up and MUTE is off.
Confirm the TV speakers are set to ON by pressing MENU
and selecting "Audio"--> "Advanced audio"• (p. 46)
® Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control• (p. 17)
®_If the TV is connected to a Panasonic Home Theater via HDMI
cable, then check VIERA Link controls• (p. 33)
,_;_ If the TV is connected to a Home Theater via optical cable,
then: Check the connection, the audio system is on, the
correct input is selected•
® Check "HDMI 1 in" or "HDMI 2 in" analog/digital audio
f .....
Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control•
® Check that all connections of externaa equipment
connected to the TV are secure•
® When using Cable or Satellite box, check the device's audio
Why is there a clicking, ticking
or buzzing sound coming from
the TV unit?
What is the easiest and best
way to connect a High-Definition
Cable or Satellite box to the TV?
S =
Some menu items are grayed:
out and cannot be selected.
_Why?
When TV power is turned on or shut off there are electrical
components that make a click sound• This is normal operation•
® Changes in the temperature and humidity of the room may /i
cause thermal expansion and contraction that can produce
sounds Th s s not a s gn of fau ty operat on or a ma funct on
® When viewing TV via an HDMI connected device, such as
a Cable or Satellite box, CC must be enabled at the device• /
The main unit radiates heat and some of the parts may
become hot. This is normal operation and does not affect
the performance of the set.
® Ensure good ventilation.
® Do not block the ventilation holes of the TV and do not
place the TV on top of other equipment.
Check that the batteries are fresh, are of the same type "_
and are installed with the correct polarity (+ & -).
_ To operate other devices, such as changing channels when
using Cable or Satellite boxes or operating non-Panasonic 1
Blu-ray players, use the remote supplied with the device• j I
® During "First time setup", you indicated in step Q-_i_ that
you are using Cable or Satellite box and in step @-_b that
the box is connected to one of the TV's AV inputs• In this
case, the Antenna/Cable input is deactivated to prevent
unintentional switching into unused tuner• To re-activate,
® Depending on certain modes or the selected input some /
options are not available• For example Zoom adjustments are
_ only available when the FORMAT is changed to zoom mode. I
®
77
r-
(b
3>
0o
(I)
C)_
_O
r-
(D
o
r3_
D
55