Flipper assembly
1
2
Figure 142.
Flipper assembly (1 of 7)
3
Figure 143.
Flipper assembly (2 of 7)
Note
Make sure that you do not lose the black, plastic sleeves that the screws are housed in.
170 Removal and replacement
Remove the following FRUs:
• Front cover. See page 161.
• Back cover. See page 162.
• Top cover. See page 164.
• Face-up bin and blind cover. See page 167.
Remove one screw (callout 1) from the back of the 8-bin mailbox.
Remove one screw (callout 2) from the front of the 8-bin mailbox.
2
1
ENWW