Table of Contents
Advertisement
Contrast
Brightness
Fig. 2. Frontpanel controls.
3. V-size. Used to adjust the overall picture to the preferred height.
4. V-shift. Used to adjust the proper vertical display position.
5. Reset. Used to return the display parameters of the current display
mode to the factory default settings. The LED display blinks two times
indicating that the settings have been changed to default.
The Reset button will only recall the factory defaults of the display mode
currently in use. The other display modes are not affected.
6. Function. Press and release the < Function > button to set the front
panel controls to the alternate mode for picture geometry and color
adjustments. Refer to Section 6.1 for more information on the use of the
7. Degauss. This control eliminates the built-up of stray magnetic fields
which affect the purity of screen colors, focus: and convergence.
8. Tilt. Use a small screwdriver to rotate this control clockwise or counter-
clockwise for picture rotation (tilt) adjustment.
Power-on LED
7
Advertisement
Table of Contents
