Mtke, Motorola Toolkit Enable - Motorola G24 Guide Developer's Manual

Table 3-248: Profile Structure – Byte 19 (Reserved for TIA/EIA-136 facilities)
b1
b2
b3
b4
b5
b6
b7
b8
Note:

+MTKE, Motorola ToolKit Enable

This command enables/disables the SIM ToolKit functionality.
Command Type
Set
Read
Test
The following table shows the +MTKE parameters.
<Parameter>
<State>
December 31, 2007
Bit
The bits comprising each subsequent byte are all: RFU, bit = 0.
Syntax
+MTKE=<Enable>
+MTKE?
+MTKE=?
Table 3-249: +MTKE Parameters
Indicates the state of the SIM ToolKit:
0 Deactivate the SIM ToolKit functionality
1 Activate the SIM ToolKit functionality
The default is 0.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Protocol Version, coded as indicated in TIA/EIA-136-123
RFU, bit = 0
Response/Action
OK
or:
+CME ERROR: <err>
+MTKE: <State>
+MTKE: (list of supported
<state>s)
OK
Description
Remarks
The Set command tells
the G24 in which mode to
work.
The Read command
returns the current values.
The Test command
returns the supported
values as a compound
value.
3-367