Table of Contents
Advertisement
TROUBLE SHOOTING GUIDE
If it appears that your DVD-Video/MONITOR player is faulty, first consult this checklist. It may be that something
simple has been overlooked.
Under no circumstances should you try to repair yourself. Only qualified service personnel can remove
the cover or service this player.
NO POWER
• Check if power plug is properly connected.
• Check if there is power at the AC outlet by plugging in another appliance.
NO PICTURE
• Check if the TV is connected and switched on.
• Select the correct AV input on the TV.
• Check the video connection.
• Check channel selector is set to AV on the TV. (See your TV manual for instructions)
• Check if the main unit or your DVD / VCD is connected and switched on when connected to monitor.
• Select the proper AV / DIN input and switch on AV or DIN correctly when connected to monitor.
DISTORTED PICTURE
• Check the disc for fingerprints and clean with soft cloth, wiping from centre to edge.
• Sometimes a small amount of picture distortion may appear. This is not a malfunction.
COMPLETELY DISTORTED PICTURE ( When Connected to TV )
• The disc is not formatted to the TV-set used ( PAL / NTSC ).
NO COLOR IN PICTURE ( When Connected to TV )
• The disc is not formatted to the TV-set used ( PAL / NTSC ).
• Ensure DVD Player is not connected through VCR.
DISC CAN'T BE PLAYED
• Ensure the disc is label side up.
• Clean the disc.
• Check if the disc is defective by trying another disc.
NO SOUND
• Check audio connections.
• Make sure the sound setup of DVD disc is correct.
• Adjust the rotary volume when connected to monitor.
NO RETURN TO START-UP SCREEN WHEN DISC IS REMOVED
• Check to see if the program requires another disc to be loaded.
• Reset by unplugging the player from the power supply, then connect the power supply again.
THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL
• Aim the remote control directly at the sensor on the front of the player.
• Avoid all obstacles which may interfere with the signal path.
• Inspect or replace the batteries (Lithium battery "CR2025").
NO AUDIO AT DIGITAL OUTPUT
• Check the digital connections.
• Check the Digital Out menu to make sure that the digital output is correctly set.
• Check if the audio format of the selected audio language matches your receiver capabilities.
- 25 -
Advertisement
Table of Contents
