Panasonic KXTA308 - ANALOG PBX Installation Manual page 287

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature References
Extension Group Assignment
Assigns an extension group for each extension. Extension groups
are used for Group Call Pickup, Station Hunting, Paging – Group
and Ring Group.
• Jack number: 01 – 08,
• Extension group number (EXT GRP): 1 – 8
All jacks — EXT GRP-1
1. Enter 600.
Display: Extension Group
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:EXT GRP-1
4. Enter the extension group number.
To change the current entry, enter the new extension group number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of eight extension groups. Each extension can only
belong to one group.
• To assign all jacks to the same extension group, press the
step 3. In this case, the display will show: #
Section 3, Features
Call Pickup, Group
Extension Group
Station Hunting
( = all jacks)
:Mixed.
Paging – Group
Ring Group
System Programming
600
key in
4-95