Changing The Camera Start Logo Image - Acer Digital camera 10.1 Mega pixels CCD User Manual

Changing the Camera Start Logo Image

You can specify the start logo image for your camera. You can select the new start
logo image among the captured still images.
1. Slide the mode switch to [
2. Select the image that you want to protect with
the / buttons.
3. Press the MENU button.
The playback menu is displayed.
4. Select [Setup1] with the
5. Select [Start Logo] with the
press the SET button.
6. Select [User Image] with the
press the SET button.
7. Select [Execute] with the
press the SET button.
This new start logo image will be activated
on the next time you turn on the camera.
User selected image is saved in the root directory of the internal memory.
In case of formatting the internal memory, the user selected start logo
image will be lost and replaced with the default start logo image.
If user replaces start up image through USB (Mass storage device
class), and that image is not fit in data format, the start up screen will be
broken.
"NO IMAGE" message is displayed when "User Image" is selected and
no images are stored in the SD memory card or internal memory.
"MEDIA FULL" message is displayed when the free space on the internal
memory is insufficient for saving user-selected image.
If the image recorded voice memo is selected to be the start logo image,
the voice memo function will fail.
The capacity for saving user image is only one. The previous start logo
image will not be recovered if you select another one as a new start logo
image.
].
button.
/ buttons, and
/ buttons, and
/ buttons, and
EN-37