Record Setup Screen - Panasonic AG-HMC80PJ Operating Instructions Manual

RECORD SETUP screen

Display
Item
mode
REC FORMAT CAMERA
(AVCHD mode
only)
REC FORMAT CAMERA
(DV mode
only)
ASPECT CONV CAMERA
(DV mode
only)
PREREC CAMERA
MODE
TIME STAMP CAMERA
INTERVAL REC CAMERA
1394 TC DV IN
REGEN
TC MODE CAMERA
DV IN
Selects the recording format.
PH 1080/60i
PH 1080/30P
PH 1080/24P
PH 720/60P
PH 720/30P
PH 720/24P
HA 1080/60i
HG 1080/60i
HE 1080/60i
• PH 1080/4P and PH 70/4P represent native recording.
• You cannot change the format during interval recording.
Selects recording format
480/60i
480/30P
480/24P
Selects the clip's aspect ratio.
SIDE CROP: Records in 4:3 ratio. Crops the left and right edges.
LETTER BOX: Records in 16:9 ratio. Adds black bars to the top and bottom edges.
SQUEEZE: Squeezes images horizontally from the left and right.
Sets PRE RECORDING to ON or OFF. (Pages 11, 60)
ON OFF
• TCG is set to FREE RUN (AVCHD mode only).
• Cannot be set during INTERVAL REC.
Specifies whether date and time information is superimposed over recorded
images.
ON: Superimposes date and time information on the image.
OFF: Does not superimpose date and time information on the image.
Enables frame-by-frame recording at specified intervals to create short videos of
scenes with slow movement over long periods of time.
Single frames are recorded at the specified interval, with 4 frames equaling 1
second of video in AVCHD mode and 30 frames per second in DV mode.
OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE, 2 MINUTES
• Set the below values for REC FORMAT when setting INTERVAL REC. If the
settings differ to the below, INTERVAL REC will be displayed in gray and
disabled.
AVCHD mode
REC FORMAT: PH 1080/4P
DV mode
REC FORMAT: 480/60i
Sets the time code for recording.
ON: Records the time code of the device connected to the DV terminal.
OFF: Records the time code set with this camera.
• When set to ON, TC MODE and TCG cannot be changed.
Selects the correction mode of the internal time code generator when the time
code of the internal time code generator is recorded.
DF: Uses the drop frame mode.
NDF: Uses the non-drop frame mode.
• TC MODE is automatically set to NDF when you set recording frame rate of
recording format to 4P (AVCHD only).
Description of settings
indicates the factory setting.
103