Install A Blank Cover - HP Model 744 - VME Workstation Manual
Hcrx/vme graphics options
Hide thumbs
Also See for Model 744 - VME Workstation:
- Installation and service manual (32 pages) ,
- Manual (14 pages) ,
- Declaration of conformity (1 page)
Table of Contents
Advertisement
Installing the HCRX/VME Graphics Hardware
6. Install a blank cover.
If you are not reinstalling an option board, in the opening on the left side of the front
panel extension plate, install a blank cover that came with the kit using two
M2x.45X5mm screws. Use a Pozidriv screwdriver to tighten the screws. See Figure 2–7.
2–10
Figure 2–7. Installing a Blank Plate
Advertisement
Table of Contents
