System Requirements; Windows Nt Systems; Windows 2000 Systems; Netware Systems - HP LC2000r - NetServer - 128 MB RAM Manual

Fibre channel host bus adapter

Hide thumbs Also See for LC2000r - NetServer - 128 MB RAM:

Table of Contents

System Requirements

The following items are required when you install the HP Fibre Channel

Adapter into a Windows NT system:

• A Pentium or higher system with PCI local bus

• Windows NT 4.0 installed with at least service pack 4

• Minimum recommended system memory is 32 MBytes

The following items are required when you install the HP Fibre Channel

Adapter into a Windows 2000 system:

• A Pentium or higher system with PCI local bus

• Windows 2000 RTM installed

• Minimum recommended system memory is 64 MBytes

The following items are required when you install the HP Fibre Channel

Adapter into a Novell NetWare system:

• A Pentium or higher system with PCI local bus

• Novell NetWare 5 installed

• Minimum system memory of 32 MBytes

Table of Contents