Removing The Lh 6000R Rack Mount Covers - HP LC2000r - NetServer - 128 MB RAM Installation Manual
Hp netserver lh 6000 installation guide
Hide thumbs
Also See for LC2000r - NetServer - 128 MB RAM:
- Handbook (178 pages) ,
- User manual (154 pages) ,
- Administrator's manual (106 pages)
Table of Contents
Advertisement
Chapter 3
Removing the LH 6000r Rack Mount Covers
CAUTION
Do NOT operate the NetServer for more than 30 minutes with
any cover (including power supplies and disk drives)
removed. Otherwise, damage to system components may
result due to improper cooling airflow.
1. Extend the anti-tip foot from under the front of the rack or insure that the
anti-tip feature is installed.
WARNING
The anti-tip foot must be extended or the anti-tip feature must
be installed to prevent the rack and NetServer from tipping
over, which could damage the NetServer and injure people.
2. Remove the bezel from the front of the NetServer by swinging the bezel
open (past 90 degrees) until it releases from the three posts on the bezel
hinge (see Figure 3-2).
30
Opening and Closing the HP NetServer
Leveler
Feet
Figure 3-1. Rack Anti-tip Foot
Anti-Tip
Foot
Advertisement
Table of Contents
Troubleshooting
