Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
show mac access-group interface
To display the ACL configuration on a Layer 2 interface, use the show mac access-group interface
command.
Syntax Description
interface
interface-number
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History
Release
12.1(19)EW
Usage Guidelines
Valid values for the port number depend on the chassis used.
Examples
This example shows how to display the ACL configuration on interface fast 6/1:
Switch# show mac access-group interface fast 6/1
Interface FastEthernet6/1:
Inbound access-list is simple-mac-acl
Outbound access-list is not set
Related Commands
access-group mode
78-16201-01
show mac access-group interface [interface interface-number]
(Optional) Specifies the interface type. Valid values are ethernet, fastethernet,
gigabitethernet, tengigabitethernet, pos, atm, port-channel, and ge-wan.
(Optional) Specifies the port number.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show mac access-group interface
2-335