Mass Storage Cables; Hot-Swap Hard Disk Drive Led Status And Activity Indicators - HP D7171A - NetServer - LPr Reference Manual

Mass Storage Cables

Cabling Label
A System backplane SCSI
connector to upper-shelf SCSI
devices
B System backplane IDE
connector to IDE devices (CD-
ROM or other)
C System backplane floppy
connector-to-floppy disk drive
D System backplane (or
NetRAID controller) SCSI
connector-to- hot-swap
backplane
2
E I C cable, system backplane to
hot-swap backplane
F
System backplane SCSI
connector-to-upper shelf SCSI
devices
G For connecting any 68-pin
SCSI cable to 50-pin device

Hot-Swap Hard Disk Drive LED Status and Activity Indicators

10
Location
Power LED
Yellow = power on
Keyboard lock LED
Yellow = keyboard locked
Hot Swap Model Only
Description
5-connector, wide (68-pin) SCSI
cable w/built-in terminator
3-connector IDE cable
2-connector floppy disk cable
3-connector, wide (68-pin) SCSI
cable
2
2-connector I C (3-pin) cable
2-connector, wide (68-pin) SCSI
cable w/built-in terminator
SCSI wide (68-pin)-to-narrow (50-
pin) adapter
Flexible disk drive activity light
Yellow or Green = disk drive active
CD-ROM drive activity light
Green = power on
Yellow = drive active
Blinking = drawer opening or closing
Hard disk status light
Green = drive powered on
Flash yellow = drive error
All drives flashing simultaneously
Flash yellow = temperature warning
Flash red = temperature emergency
Hard disk activity light
Green = drive active
Part Number
5183-2412
5183-2411
5183-2410
5183-2484
5182-6730
Available with
NetRAID
controller only
5183-4550