Power-Down Procedure - HP D7171A - NetServer - LPr Manual

Chapter 2

Power-Down Procedure

Power to the satellite chassis must be turned off before removing or installing the
SCSI Extender.
1. Save your existing system configuration.
2. Log off all users, shut down all networking software, applications, and the
operating system.
3. Press the DC power switch on the HP NetServer's control panel to turn the
system off. (Figure 2-2).
Power
LED
DC Power
AC Power
Switch
LED
Figure 2-2. HP NetServer Control Panel
Installing the SCSI Extender
7