Kbd (Keyboard) Tests - HP D6030A - NetServer - E50 User Manual

Chapter 5
Code Description
Test.
03FEh Diskette data
read/write error in
Sequential Test.
0380h Drive not ready.
03AAh Drive not ready.
03CCh DiagTools Error
03EEh DiagTools Error
03FFh DiagTools Error

KBD (Keyboard) Tests

The KBD Test Menu includes testing the keyboard controller, scanning, LEDs, clock line, and data
line for proper functionality.
Code Description
0400h DiagTools received
an Keyboard
Controller interface
error.
0401h DiagTools issued
commands to
Keyboard
Controller and
received improper
responses.
0410h Keyboard clock line
is stuck low/high.
0411h Keyboard clock line
is stuck low/high.
0412h Keyboard data
stuck low/high.
Recommended Action
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
Download a new version of DiagTools from the HP web site and run it. If you get
the same error, call the HP Customer Care Center.
Recommended Action
1. Power down the system. (Caution, keyboards are not hot-swappable. A
keyboard swap with power on may damage the system board.)
2. Replace the keyboard and rerun the test.
3. Replace the system board.
1. Power down the system. (Caution, keyboards are not hot-swappable. A
keyboard swap with power on may damage the system board.)
2. Replace the keyboard and rerun the test.
3. Replace the system board.
1. Power down the system. (Caution, keyboards are not hot-swappable. A
keyboard swap with power on may damage the system board.)
2. Replace the keyboard and rerun the test.
3. Replace the system board.
1. Power down the system. (Caution, keyboards are not hot-swappable. A
keyboard swap with power on may damage the system board.)
2. Replace the keyboard and rerun the test.
3. Replace the system board.
1. Power down the system. (Caution, keyboards are not hot-swappable. A
keyboard swap with power on may damage the system board.)
Error Message Reference
51