UM330X Installation Guide
Desktop and Ceiling Mount
Input Panel
Control Codes
Note: Contact your NEC rep for codes not listed.
Cable Connection
Communication Protocol:
Baud Rate:
38400 bps
Data Length:
8 bits
Parity:
No Parity
Stop Bit:
One bit
X on/off:
None
Communications: Full duplex
NOTE 1: It is recommended to set the projector to "Idle Mode" in the Setup menu for best Power ON response.
NOTE 2: Pins 2, 3, 5, 6 and 8 are used inside the projector.
NOTE 3: For long cable runs it is recommended to set communication speed in the Setup menu to 9600 bps.
www.necdisplay.com
NEC Display Solutions of America, Inc.
To TxD of PC
To RxD of PC
To GND of PC
1
2
3
4
5
6 7
8
9
To RTS of PC
To CTS of PC
UM330X
Page 8 of 8
v1.1