HP D5970A - NetServer - LCII Manual page 18

Chapter 2
3. Clips attach the front bezel to the NetServer chassis. To remove the bezel,
simply pull it toward you until it comes free, as shown in Figure 2-6.
Figure 2-6. Remove Front Bezel from NetServer in Compaq Rack
4. Unscrew the NetServer chassis from the Compaq rack, as follows:
a. Remove two screws securing the left recessed bracket to the rack
column, as shown in Figure 2-7. Do not unscrew the bracket from the
NetServer.
b. Remove two screws securing the right recessed bracket to the rack
column, as shown in Figure 2-7. Do not unscrew the bracket from the
NetServer.
14
Installation